Difference between revisions of "Machine Shop"
Ron.Thomas (talk | contribs) (Added typical specs for band saw blade) |
|||
(3 intermediate revisions by 2 users not shown) | |||
Line 7: | Line 7: | ||
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br> | Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br> | ||
− | Band Saw<br> | + | Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - [https://www.mcmaster.com/catalog/4179A528 McMaster-Carr])<br> |
Drill Press<br> | Drill Press<br> | ||
Line 27: | Line 27: | ||
== Resources == | == Resources == | ||
− | *[[Media:Nardini | + | === Class Notes === |
+ | *[[Media:Nardini_1440E_Lathe_Class_-_101.pdf|Nardini Lathe Class 101]] | ||
+ | |||
+ | *[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]] | ||
+ | |||
+ | *[[Mitek training|Class materials and operating procedure for CNC mill]] | ||
=== Materials === | === Materials === |
Revision as of 10:56, 7 May 2020
Machines in Tinkermill Machine Shop
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)
Drill Press
Pedestal Grinder
Deckle single flute grinder - Operating Manual
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual
52" sheet metal roll/press brake/shear tool - Operating Manual
20k pound hydraulic press, misc. arbor presses, etc.
Sheet metal hand tools
Tooling, granite plate, inspection tools.
Resources
Class Notes
Materials
Machine Shop Projects
Tool Selection
Back to: Main Page