Difference between revisions of "Machine Shop"
Ron.Thomas (talk | contribs) (Added tap follower drawing.) |
|||
(25 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
'''Machines in Tinkermill Machine Shop''' | '''Machines in Tinkermill Machine Shop''' | ||
− | Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling | + | Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling<br> |
− | + | Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)<br> | |
− | + | Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br> | |
− | + | Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - [https://www.mcmaster.com/catalog/4179A528 McMaster-Carr])<br> | |
− | + | Drill Press<br> | |
− | + | Pedestal Grinder<br> | |
− | + | Deckle single flute grinder - [[Media:DECKEL_OPERATING_INSTRUCTIONS.pdf|Operating Manual]] | |
− | + | Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - [[Media:Challenger.pdf|Operating Manual]] | |
+ | 52" sheet metal roll/press brake/shear tool - [[Media:Shear.pdf|Operating Manual]] | ||
+ | 20k pound hydraulic press, misc. arbor presses, etc. | ||
Sheet metal hand tools | Sheet metal hand tools | ||
− | Tooling, inspection tools. | + | Tooling, granite plate, inspection tools. |
+ | == Resources == | ||
− | + | === Class Notes === | |
− | [[Media:Tubalcain_Tap_Follower_Drawing.pdf|Spring-Loaded Tap Follower]] | + | *[[Media:Nardini_1440E_Lathe_Class_-_101.pdf|Nardini Lathe Class 101]] |
+ | |||
+ | *[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]] | ||
+ | |||
+ | *[[Mitek training|Class materials and operating procedure for Mitek CNC mill]] | ||
+ | |||
+ | === Materials === | ||
+ | *[[Sourcing Materials]] | ||
+ | |||
+ | === Machine Shop Projects === | ||
+ | *[[Media:Tubalcain_Tap_Follower_Drawing.pdf|Spring-Loaded Tap Follower]] | ||
+ | |||
+ | === Tool Selection === | ||
+ | *[https://www.ctemag.com/news/articles/understanding-identification-system-indexable-inserts Understanding the Identification System for Indexable Inserts] | ||
+ | |||
+ | |||
+ | [[Category:Machine Shop]] | ||
+ | Back to: [[Main Page]] |
Revision as of 17:34, 4 February 2021
Machines in Tinkermill Machine Shop
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)
Drill Press
Pedestal Grinder
Deckle single flute grinder - Operating Manual
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual
52" sheet metal roll/press brake/shear tool - Operating Manual
20k pound hydraulic press, misc. arbor presses, etc.
Sheet metal hand tools
Tooling, granite plate, inspection tools.
Resources
Class Notes
Materials
Machine Shop Projects
Tool Selection
Back to: Main Page