File:Gear-inlay.jpg

No higher resolution available.

Gear-inlay.jpg ‎(450 × 400 pixels, file size: 112 KB, MIME type: image/jpeg)

Example of wood inlay using laser cutter.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:45, 10 January 2017		450 × 400 (112 KB)	Cedarm (talk \| contribs)	Example of wood inlay using laser cutter.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPad
Exposure time	1/15 sec (0.066666666666667)
F Number	f/2.4
ISO speed rating	80
Date and time of data generation	20:31, 10 January 2017
Lens focal length	4.28 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	GIMP 2.8.18
File change date and time	20:45, 10 January 2017
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	20:31, 10 January 2017
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	3.9069050554871
APEX aperture	2.5260688216893
APEX brightness	2.4809926082365
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, No flash function
Image width	2,592 px
Image height	1,936 px
Focal length in 35 mm film	35 mm