Machine Shop
Machines in Tinkermill Machine Shop
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)
Two Nardini 1640 Lathes. The tool posts on both are BXA and tail stock taper is 3MT. Threading is inch on one and metric on the other.
The BXA cut-off holder takes a 1/8" x 11/16" x 5" blade.
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)
Drill Press
Pedestal Grinder
Deckle single flute grinder - Operating Manual
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual
Baileigh - 52" sheet metal roll/press brake/shear tool - Operating Manual
| Material | Type | Size |
| Mild Steel | Sheet | 16Ga (0.051) |
| Round Rod (roll only) | .250 .312 .375 | |
| Aluminum | 1100-0, 2024-0 | 0.125 |
| 5052-0, 6061-T4 | 0.125 | |
| 2024-T3,5052-H34 | 0.090 | |
| 5086-H36, 6061-T6 | 0.090 | |
| Copper and Alloys | Electrolytic Copper | 14Ga (0.064) |
| Bronze Commercial | 14Ga (0.064) | |
| Brass 70-30 | 14Ga (0.064) | |
| Nickel Alloy | Inconel 600 | 20Ga (0.032) |
| Monel R405 | 20Ga (0.032) | |
| Nickel 200A Annealed | 20Ga (0.032) | |
| Zinc as rolled | 16Ga (0.051) |
Sheet metal hand tools
Tooling, granite plate, inspection tools.
Resources
Class Notes
We have two classes on the Nardini lathe, a 101 that only covers collet work with manual feed, a 201 that covers the chuck, mechanical feed and threading. We also combine the 101 & 201 classes for experienced lathe operators. Check with @sebastian.wessels or @todd.franks on Slack if you qualify for the combo class. We drop the part where you do manual threading with a tap on the lathe when we combine the classes. The 101 class consists of the video below and then the in-person part where the instructor verifies that the student is capable after watching the video.
