Jewelry and Metalcraft

Our shop is dedicated to working with non-ferrous metals such as copper, brass, bronze, aluminum, etc., or precious metals and to the fabrication of relatively small items. Here is a short list of both decorative and functional skills you can learn and practice at our shop:

• Wire work: braiding, wrapping, chain-maille, jewelry findings, beading

• Forming and shaping metal: jewelry, vessels, small home decor items

• Joining metal: soldering, cold connections such as rivets, hinges, latches

• Decorating metal: piercing, texturing, stamping, enameling, imprinting, coloring, etching

• Casting and sculpting

• ... and more. If you have a request for a class or have a specific question, please send a note to the shop captain.

Open studio opportunity

Please come, learn, and create something cool at the Metalcraft and Jewelry Open Studio. This regularly held time on Sunday afternoons from 12:30-2:30 is perfect for exploring the shop, getting acquainted with others with similar interests, and asking questions. Do you have a craft or piece of jewelry you'd like to make using metal, but not sure how to begin? Someone with experience will be around to help you get familiar with the tools available and how to use them. This is very informal, just RSVP on the MeetUp page and come! Open studio dates are scheduled on the MeetUp calendar, as are more formal technique instruction and tool certification classes.

References and Resources

• Media:Bookmarks - Resources.pdf - Contains a few hundred bookmarked resources accumulated over several years by the shop captain, Lynne Davis. (As is. Links may not be current.)

• Lapidary Forum This is an extremely comprehensive and authoritative site for jewelry makers.
• Buffing and Polishing Guide from Sharr Choate's book, Chapter 8: Creative Gold and Silversmithing

• MeetUp calendar for TinkerMill
• If you are a TinkerMill member, please join our channel on Slack.
• Contact Shop Captain: Lynne Davis (lynne.davis@tinkermill.org)

Processes supported

Here are some examples of jewelry making and non-ferrous metal craft processes for which our shop has tools, equipment and expertise:

• Casting
• Cold connections
• Enameling
• Etching
• Firing - Kiln
• Forming
• Hand fabrication
• Lapidary
• Marriage of Metals
• Metal sculpture
• Milling
• Patination
• Precious Metal Clay (PMC)
• Raising
• Stone setting
• Soldering
• Spinning metal
• Surface treatments
• Wire wrapping/Beading

Equipment List

Hand Tools

• Hammers-assorted
• Pliers-assorted
• Files-assorted
• Files-assorted needle
• Sanding sticks
• Jeweler's saw (x2)
• Calipers
• Hand shears, tin snips - assorted
• Hole punch (Prat and Whitney)
• Bench blocks

Bench Tools

• Flex Shaft w/assorted bits
• Dremel w/drill press stand
• Bench pins
• Small vice/bench block (x2)
• Large vice
• Large anvil
• Belt sander
• Bench grinder/wire wheel
• Dapping block and punches

Soldering station

• Butane torch
• Oxygen/Acetylene torch
• MAPP gas torch
• Pickle pot, chemical
• Tongs, tweezers
• Rinse pot
• Cleaning supplies

Patina setup

• Glass mixing jars and dishes
• Brushes/applicators
• Chemicals
• Steel wool

Electro-etch setup

• DC Power supply
• "D" battery holders
• Battery clips
• Etching vessels
• Resist materials
• Chemicals

Firing Kilns

• Kilns x 2 with programmable controllers (one owned by Sarajane Helm)

Enameling Setup

• Sifting screens
• Enamel powders
• Enamel holding agent (e.g. Kleerfire)
• Kiln trivets, wire screen

Casting

• Centrifugal Spin Caster
• Sand casting kit with casting frame, crucible, release agent, pre-mixed casting sand, tongs

Lapidary

• Trim saw, cab forming wheels (Lortone LU6X Combination Unit) refurbished

Lathe (On Loan to TinkerMill) Hydraulic Press

• (to be converted from battery casing press to custom forming tool)

Rolling Mill

• Small Pepe

3-in-1

• Slip-roller - 9"
• Bending brake 12" 5 finger sections, bends to 90 degrees
• Shear: 12" guillotine style

Stand-alone brake (18")

Polishers

• Magnetic vibratory tumbler
• Buffing wheel

Classes

Jewelry and Metal Craft Projects Catalog

Project classes are defined as a use of the shop under instructor supervision for the purpose of making an identified project or learning an identified process or technique. It is not a certifying class and does not qualify the student to use the equipment and tools unsupervised.

Browse the catalog

Jewelry and Metal Craft Certifications

Certification classes are defined as the use of the shop to impart knowledge and practice sufficient to qualify the student to use the information learned at the shop independently.

• Curriculum Map Media:Curriculum_map_v29_printable.pdf
  Map is constantly under development.

Brief descriptions of certification classes are as follows. For complete information see the Jewelry and Metal Craft Certifications page.

• Metals 100: Introduction to the Jewelry and Metal Crafts Shop

Metals 100 is a comprehensive introduction to the Jewelry and Metal Craft shop within TinkerMill.

It is a non-certificate class but is a prerequisite for any shop certification class.

It introduces the shop's tool groups, safety and guidelines, self-study resources,

and examples of the types of projects best suited to this shop.

• Metals 101: Basic Hand Tools and Fabrication
• Metals 102: Power Tools and Uses

• Metals 200: Introduction to Torch Use, Theory and Practice

• Metals 201: Torch Use - Single Fuels
• Metals 202: Torch Use - Dual Fuels
• Metals 203: Torch Use - Molten Metal

• Metals 300: Introduction to Chemical and Electrolytic Surface Treatments

• Metals 301: Electrolytic Etching
• Metals 302: Applying Chemical Patinas and Inks
• Metals 303: Anodizing

• Metals 400: Introduction to Kiln Use

• Metals 401: Using the Metal Craft Shop Kiln

• Metals 500: Introduction to Lapidary Equipment

  Metals 501: Using the Lapidary for Stone Shaping

• Metals 600: Introduction to Lathes at TinkerMill

• Metals 601: Using the Small Metal Lathe

Teaching

Teaching is sharing and inspiring others to learn and share. Here are a few ways this can be accomplished:

• Think, Pair, Share
• Mentorships
• Projects
• Techniques
• Open studio
• Certification instructor

Contact the shop captain to learn more, or visit Teaching Classes