Difference between revisions of "Pottery/Ceramics"

From TinkerMill Wiki
Jump to navigation Jump to search
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
The Pottery has recently moved to the Trailer out in the back.  All forms of ceramics are practiced here, from mold-making to wheel throwing to tile-making to... all kinds of fun things.
+
Welcome to TinkerMill's Muddy Makers Pottery!
  
  
−
== Pottery Basics: ==
+
Our pottery studio is a collaborative space. We're a community that works together to keep things running smoothly and safely. Respect for each other, the studio, and Tinkermill as a whole is essential. With that in mind, please take a moment to read and agree to our General Studio Policies [https://docs.google.com/forms/d/e/1FAIpQLSdzBikg5TiT1JiN4KLukqPSI6gpubFFaPnqjDsDigxB9bMSxg/viewform?usp=sf_link].
  
−
Clean up after yourself!  Do your best to leave the place in better condition than you found it. If we can tell that someone has been here by a dirty wheel or a dusty floor, you aren't done!  Please see notes on clean-up procedures below.
+
As a community studio, everyone is responsible for keeping the space clean. Always use water to clean, and remember, it's not clean until its dry and clean. So be sure to grab a rag and dry what you wash. evaporating water leaves behind a film of white silica dust.
  
−
While we encourage children in the pottery, please be aware that the pottery is not a baby-sitting service.  All potteries contain chemicals which can be harmful if mishandled.  Parents/guardians must accompany and supervise minors at all times.
 
  
−
When mixing dry glazes, always wear a dust mask (or, if you own one, a respirator) and rubber gloves.
+
We have everything you need to create:
  
−
It will be a while before we get water plumbed in to the trailer.  In the meantime, please attach the red hose (on the map rack outside the trailer) to the spigot on the front of the building and collect water from there.  The hose is long enough to reach almost to the trailer.
+
Five pottery wheels with changeable direction for both right and left-handed throwers
  
−
Yes, there is wifi in the trailer.
+
A wedging table and a work table
  
−
WRITE YOUR NAME ON YOUR WORK!
+
A slab roller
  
 +
Throwing and handbuilding tools kits
  
−
== Supplies: ==
+
Two Skutt Kilns
  
−
'''Clay bodies:'''
+
Communal storage for work in progress
  
−
TYPES: We generally keep white earthenware (CT-3 and other kinds) in stock.  We also usually have some white, cone 5 stoneware, though not always. Porcelains of varying types are brought in for class use only at this time.  We don't keep red clays on hand as kids in the pottery make a mess with them and they stain clothing, which annoys their parents.  You are free to bring in your own clays.
 
  
−
PROCEDURES: We are currently devising a clay storage space, but until then, clays may be stored on the shelving behind the wheels.  Although the inside of the trailer is not as dry as the rest of TinkerMill, please make sure that you seal all bags immediately after removing clay from them.  It's still Colorado and we don't believe in humidity here.
 
  
−
DISPOSAL: Clay is infinitely recyclable until it's been fired.  When you have dry clay trimmings or clay which has become too dry to use, there are 5-gallon buckets under the table by the window, marked with what type of clay goes in them.  This clay can be recycled later.  Please, whatever you do, do not mix up clays; always put clay into the proper container.
+
Studio Use Fees
  
−
When you are finished building or throwing and are left with a bucket of clay water, please take the bucket outside and empty it on the gravel. Never, never empty clay, clay water, or any pottery water, on the concrete or in Lake TinkerMill.
+
We operate on the honor system. Please be honorable,
  
−
COSTS: Community clay is sold for $1/pound (all types). If TinkerMill members would like to use clay bodies that we don't keep in stock, please feel free to contact the shop captain.  We'll include it in our next order from our supplier and you can then buy it from TinkerMill at our cost.  You can pay for clay
+
To keep the studio self-supporting we have studio use fees of:
  
−
CASTING SLIP:  We currently have a small quantity of ^06 white earthenware slip (which turns out not to be microwave safe, curiously), and a small quantity of ^6 porcelain slip.
+
$2 / hour
  
 +
$5 / day
  
−
'''Glazes:'''
+
$15 / week
  
−
TinkerMill is very fortunate indeed to have had donated to us many commercial glazes suitable for earthenware.  We also have a limitted amount of ^5 glazes and a few raku glazes.  Use of these glazes is included in the price of the clay you buy.
+
$30 / month
  
−
At this time, our collection of glaze ingredients (frits, oxides, powdered clays, etc) is limitted to those used in specific classes.
+
$240/year
  
−
We have special procedures for the disposal of water used to wash glaze brushes and containers, and for the containers themselves.  Please see the cleanup section below.
+
We also have a drop and fire service that is available to non-members, and to members who are doing all their work at home. Non-members will need to set up an appointment to bring their work in to be fired. Keep in mind, this is only for drop and fire of work made outside the studio when less than a week ($15) of studio usage has been paid.  
  
 +
Fees are based on cubic inches (ci) with a minimum due, and there is a 50% discount for members. Round the cubic inch to the nearest half inch and the height of a plate is a minimum of one inch.
  
−
'''Tools:'''
+
If you have stacking bowls that can be stacked while firing you can do your measurement stacked. To fire while stacking the rims must not be touching, so the smaller bowl must fit fully inside the outer bowl.
  
−
We have cans full of all kinds of pottery/ceramic tools, and they should be found (but won't always be) on the shelves behind the wheels.  We have a number of different kinds of loop tools, a collection of cookie cutters, and the like. 
+
Minimum fee for bisque fire $5 members or $10 non-member
  
−
We also make specialty tools on the 3D Printers from time to time.  Ask the shop captain if you would like a special tool make, or if you are interested in making one of your own.
+
Minimum fee for glaze fire $8 members or $16 non-member
  
−
We also have "Made At TinkerMill" stamps for your work, which we encourage you to use.
+
Per piece per cubic inch for bisque $.01 members or $.02 non-members
  
 +
Per piece per cubic inch for glaze $.02 members or $.04 non-members
  
−
'''Equipment:'''
+
(a standard size mug 4.5”x4.5”x5” would be $1.01 to bisque for a member. You would be able to fire four mugs within the minimum fee. The fifth mug would take the price over $5. You would be able to glaze three of those mugs within the $8 minimum for member glaze. The fourth mug would increase the price.)
  
−
TinkerMill owns 2 Thomas Stewart '''electric wheels'''.  There is also an old Thomas Stewart '''kick-wheel''' outside (it tends to wander) for purists. We also have three Artista portable wheels, one of which is usually in the travelling trailer.  These are great for kids and can be taken outside and used there.
+
There is a flat rate if you rent the whole kiln. It is done by appointment only and comes with a loading fee for the kiln crew member who loads your work.  
  
−
We have a '''table-top slab roller''' which ''requires training before use'', since it can seriously injure fingers. Please do not allow children to use the slab roller.  Adults may do it for them, but children may not operate it themselves.
+
Mini Kiln 2.6cf (5,832ci) $25 members    / $40 non-members
  
−
We have a '''casting table''' which requires fixing.  Please contact the shop captain for information about how you can help.
+
Large kiln 5.7cf (11,638ci)    $45 members / $75 non-members
  
 +
Applicable fees must be paid at the time of use.
  
−
== Clean-Up And Disposal ==
+
Clay and Glazes:
  
−
''Nota Bene:'' Wet cleanup is required in all areas of the pottery.  It is absolutely imperative that no dust be kicked up.  Pottery dust can contain free silica, which is harmful to lungs and electronic equipment.  We do have a small shop-vac which can be used for minor/quick clean up of small spaces. Anyone who takes it upon themselves to mop the floor will be considered a hero and given all the honors due thereto.
+
TinkerMill supplies cone six white stoneware for $1/lb: We also have many glaze options to chose from, and glaze is included in the studio fees.
  
 +
You may bring your own clay as long as it is cone six. We're not responsible for improperly labeled clay that over, or under, fires. However, you will be responsible for any damaged kiln shelves caused by your clay. We do not fire hi-fire clay to ^10.
 +
All work in progress must have a filled out firing slip. multiple pieces can be on one firing slip if the pieces contain an identifying mark.
 +
You can bring your own lead-free glaze, but make sure it's compatible with your clay body and is cone six.
 +
All outside clay and glaze must be cleared with the shop captains. Take a picture of your clay/glaze label and send it to pottery@tinkermill.org.
  
−
'''Disposal of clay water and waste:''' Clay water can be disposed of by dumping on the gravel part of the parking lot.  On absolutely no account whatsoever may anyone put clay water down the sink in the main space.
+
 
 +
 
 +
[[Category:Shops]]

Latest revision as of 03:10, 19 July 2024

Welcome to TinkerMill's Muddy Makers Pottery!


Our pottery studio is a collaborative space. We're a community that works together to keep things running smoothly and safely. Respect for each other, the studio, and Tinkermill as a whole is essential. With that in mind, please take a moment to read and agree to our General Studio Policies [1].

As a community studio, everyone is responsible for keeping the space clean. Always use water to clean, and remember, it's not clean until its dry and clean. So be sure to grab a rag and dry what you wash. evaporating water leaves behind a film of white silica dust.


We have everything you need to create:

Five pottery wheels with changeable direction for both right and left-handed throwers

A wedging table and a work table

A slab roller

Throwing and handbuilding tools kits

Two Skutt Kilns

Communal storage for work in progress


Studio Use Fees

We operate on the honor system. Please be honorable,

To keep the studio self-supporting we have studio use fees of:

$2 / hour

$5 / day

$15 / week

$30 / month

$240/year

We also have a drop and fire service that is available to non-members, and to members who are doing all their work at home. Non-members will need to set up an appointment to bring their work in to be fired. Keep in mind, this is only for drop and fire of work made outside the studio when less than a week ($15) of studio usage has been paid.

Fees are based on cubic inches (ci) with a minimum due, and there is a 50% discount for members. Round the cubic inch to the nearest half inch and the height of a plate is a minimum of one inch.

If you have stacking bowls that can be stacked while firing you can do your measurement stacked. To fire while stacking the rims must not be touching, so the smaller bowl must fit fully inside the outer bowl.

Minimum fee for bisque fire $5 members or $10 non-member

Minimum fee for glaze fire $8 members or $16 non-member

Per piece per cubic inch for bisque $.01 members or $.02 non-members

Per piece per cubic inch for glaze $.02 members or $.04 non-members

(a standard size mug 4.5”x4.5”x5” would be $1.01 to bisque for a member. You would be able to fire four mugs within the minimum fee. The fifth mug would take the price over $5. You would be able to glaze three of those mugs within the $8 minimum for member glaze. The fourth mug would increase the price.)

There is a flat rate if you rent the whole kiln. It is done by appointment only and comes with a loading fee for the kiln crew member who loads your work.

Mini Kiln 2.6cf (5,832ci) $25 members / $40 non-members

Large kiln 5.7cf (11,638ci) $45 members / $75 non-members

Applicable fees must be paid at the time of use.

Clay and Glazes:

TinkerMill supplies cone six white stoneware for $1/lb: We also have many glaze options to chose from, and glaze is included in the studio fees.

You may bring your own clay as long as it is cone six. We're not responsible for improperly labeled clay that over, or under, fires. However, you will be responsible for any damaged kiln shelves caused by your clay. We do not fire hi-fire clay to ^10. All work in progress must have a filled out firing slip. multiple pieces can be on one firing slip if the pieces contain an identifying mark. You can bring your own lead-free glaze, but make sure it's compatible with your clay body and is cone six. All outside clay and glaze must be cleared with the shop captains. Take a picture of your clay/glaze label and send it to pottery@tinkermill.org.

Retrieved from "https://wiki.tinkermill.org/index.php?title=Pottery/Ceramics&oldid=28791"