Laser Cutter Settings

From TinkerMill Wiki
Revision as of 17:20, 3 June 2017 by Mjporter86 (talk | contribs)
Jump to navigation Jump to search

General Cutting Settings

These settings are for general purpose use to cut materials. They should be expected to fully cut the material, but ALWAYS test settings to verify they work with your specific material!

Woods

Material Thickness Speed Power Passes Notes

Polymers

Material Thickness Speed Power Passes Notes

Paper Materials

Material Thickness Speed Power Passes Notes

Miscellaneous

Material Thickness Speed Power Passes Notes

General Engraving Settings

The settings here are for general-purpose use and are NOT calibrated for depth! ALWAYS test settings to verify them!

Woods

Material Thickness Speed Power Passes Notes

Polymers

Material Thickness Speed Power Passes Notes

Paper Materials

Material Thickness Speed Power Passes Notes

Miscellaneous

Material Thickness Speed Power Passes Notes

Detailed Settings

Below are in-depth engraving tests that have been contributed by various members. Unlike the general purpose settings, these settings include the approximate depth to which the engraving will be cut, which may be useful for things such as stamps.

Back to: Main Page