Difference between revisions of "Jewelry and Metal Craft Certifications"

From TinkerMill Wiki
Jump to navigation Jump to search
(Created page with "'''Metals 100: Introduction to the Jewelry and Metal Crafts Shop''' Class Handout - Metals 100 * Prerequisite: none * Certification: no *...")
 
 
(53 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
'''Metals 100: Introduction to the Jewelry and Metal Crafts Shop'''
+
'''[[:File:Curriculum_Map_v31.pdf | Curriculum Map v31]]'''
−
[[:File:Handout_Metals_100.pdf|Class Handout - Metals 100]]
+
 
 +
== '''Metals 100: Introduction to the Jewelry and Metal Crafts Shop''' ==
 +
 
 +
[[:Media:Metals_100_Certification_intro.pdf|Class Handout-Metals 100]]
 
    
 
    
 
* Prerequisite: none  
 
* Prerequisite: none  
 
* Certification: no
 
* Certification: no
−
* Duration: 60 minutes
+
* Duration: 60 minutes, online preview with in person quiz
 
* Prerequisite for: All certificate classes
 
* Prerequisite for: All certificate classes
 
    
 
    
Line 14: Line 17:
 
Metals 100 covers:
 
Metals 100 covers:
 
* Safety first
 
* Safety first
−
* Shop rules, (Ferrous vs Nonferr.) priority use, scale matters
+
* Shop expectations, (Ferrous vs Nonferrous) attire,priority use, scale matters
 
* Tool groups in the shop
 
* Tool groups in the shop
 
* Overview of curriculum paths and classes to become certified for independent tool use
 
* Overview of curriculum paths and classes to become certified for independent tool use
Line 21: Line 24:
 
----
 
----
  
−
'''Metals 101: Basic Hand Tools & Fabrication'''  
+
=== '''Metals 101: Basic Hand Tools & Fabrication''' ===
  
−
[[:File:Handout_Metals_101.pdf|Class Handout - Metals 101]]
+
[[:Media:Metals_101_Certification_part_1v1-23.pdf|Class Handout - Metals 101]]
 
    
 
    
 
* Prerequisite: Metals 100  
 
* Prerequisite: Metals 100  
 
* Certification: Metals 101 - Hand tools
 
* Certification: Metals 101 - Hand tools
−
* Duration: 1.5 - 2 hours
+
* Duration: 3 hours
−
* Required for: Metals 102 (Power tools) and Metals 201 (Single Fuel Torch) and specified project classes
+
* Required for: Completing the certification series. Metals 102 and 103
  
−
Metals 101 is a certification class for independent use of the shop's basic hand tools. It provides:
+
Metals 101 is a certification class, part one. The series of classes will certify a student for independent use of the shop for basic fabrication. This class provides:
−
* Instruction on the safe and appropriate use of unpowered hand tools
+
* Instruction on the safe and appropriate use of un-powered hand tools
−
* List of tools included in this certification
+
* List of tools that may be used while creating the certification project.
 
* Additional self-study references and list of resources: e.g.: Wire+Metals Text, Web
 
* Additional self-study references and list of resources: e.g.: Wire+Metals Text, Web
 
* Time in class or at Open Studio times to practice using the tools and complete the sampler project required for certification
 
* Time in class or at Open Studio times to practice using the tools and complete the sampler project required for certification
 
* Certification sampler project: Described in class handout
 
* Certification sampler project: Described in class handout
  
−
''Tools certified:''
+
''Tools that may be used in the certification project:''
 
* Jeweler’s saw   
 
* Jeweler’s saw   
 
* Hole punch
 
* Hole punch
Line 45: Line 48:
 
* Ring mandrel, bench block, anvil
 
* Ring mandrel, bench block, anvil
 
* Dapping punch
 
* Dapping punch
−
* Disc cutter
 
 
* Pliers
 
* Pliers
 
* Aviation shear
 
* Aviation shear
Line 51: Line 53:
 
* Bench pin
 
* Bench pin
 
* Stamps and punches
 
* Stamps and punches
−
* Jumpring maker
+
* Jump ring maker
  
 
----
 
----
  
−
'''Metals 102: Power Tools & Uses'''
+
=== '''Metals 102: Power Tools & Uses''' ===
  
−
[[:File:Handout_Metals_102.pdf|Class Handout - Metals 102]]
+
[[media:Metals_102_Power_Tools_Certification_2019v2.pdf|Class Handout - Metals 102]]
 
    
 
    
 
* Prerequisite: Metals 100
 
* Prerequisite: Metals 100
Line 63: Line 65:
 
* Duration: 2 hours
 
* Duration: 2 hours
 
* Required for: Specified project classes
 
* Required for: Specified project classes
−
 
  
 
Metals 102 is a certification class for independent use of the shop's listed power tools. It provides: <br />   
 
Metals 102 is a certification class for independent use of the shop's listed power tools. It provides: <br />   
Line 73: Line 74:
  
 
''Tools certified:''
 
''Tools certified:''
−
* Dremel Drill press
+
* Drill press
−
* Foredom Flexshaft
+
* Flexshaft
 
* Bench Buffer
 
* Bench Buffer
−
* Belt Sander
+
* Belt/Disc Sander
  
 
----
 
----
  
−
'''Metals 200: Introduction to Torch use: Theory and Practice'''
+
== ''Metals 103: Introduction to Torch use: Theory and Safety'' ==
−
 
+
 
 
* Prerequisite: Metals 100 and 101
 
* Prerequisite: Metals 100 and 101
 
* Certification: none  
 
* Certification: none  
−
* Duration: 60 minutes
+
* Duration: 60 minutes, online with quiz in person.
−
* Required for: Metals 201 (Single Fuel Torches)
+
* Required for: Metals 104, part three of the shop certification series.
  
−
The Metals 200 is a non-certificate class to introduce the use of the shop's torches to anneal, join or fuse metal.  
+
The Metals 103 is a non-certificate class to introduce the use of the shop's torches to anneal, join or fuse metal.  
 
You will hear about the certificate classes offered, and learn when you can use the torches independently at TinkerMill.  
 
You will hear about the certificate classes offered, and learn when you can use the torches independently at TinkerMill.  
 
This class demonstrates the differences between soldering, brazing, and welding, annealing and tempering metal.
 
This class demonstrates the differences between soldering, brazing, and welding, annealing and tempering metal.
 
It also provides a bit of theory and terminology for this practice.  
 
It also provides a bit of theory and terminology for this practice.  
−
<br />
 
  
−
''Metals 200 covers:''
+
[[:Media:Acetylene_Torch_%26_Soldering_Safety.pdf|Class Handout - Acetylene Torch Soldering Safety]]
 +
 
 +
''Metals 103 covers:''
 
* Safety first
 
* Safety first
 
* Soldering station equipment, supplies, and conventions
 
* Soldering station equipment, supplies, and conventions
Line 100: Line 102:
 
* Flame heat principles
 
* Flame heat principles
 
* Understanding annealing
 
* Understanding annealing
−
* Demonstrations
 
 
* Examples
 
* Examples
 
* Q&A
 
* Q&A
 
* Resources: books, magazines, web, TM experts, organizations, and project suggestions
 
* Resources: books, magazines, web, TM experts, organizations, and project suggestions
 
* List of tools that are included in certifications
 
* List of tools that are included in certifications
 +
'Reading this class online DOES NOT certify anyone to utilize the torches in the Metalcraft, Jewelry and Lapidary shop.'
  
 
----
 
----
−
'''Metals 201: Torch use - Single fuel'''
+
=== '''Metals 104: Part three of the certification series, Torch application and safety''' ===
−
 
+
 
−
* Prerequisite: Metals 200
+
[[:Media:Metals_200-201_single_fuel_torches.pdf |Class Handout - Metals 200-201]]
−
* Certification: Metals 201 - Single Fuel Torches and tools requiring annealed materials
+
 
−
* Duration: 90-120 minutes
+
* Prerequisite: Metals 103
−
* Required for: Metals 202 and specified project classes
+
* Certification: Metals 104 final class in the certification series, complete the certification project
 +
* Duration: 3 hours
 +
* Required for: Independent use of the shop, future specific technique classes, independent fabrication, teaching classes
  
−
This class is a certification class for independent use of the shop's single fuel torches (Butane, Propane, MAPP Gas, Acetylene-Air).  
+
This class is a certification class for independent use of the shop's single fuel torch (Acetylene-Air).  
 
It provides: <br />
 
It provides: <br />
 
* Theory: Annealing different metals, silver soldering
 
* Theory: Annealing different metals, silver soldering
−
* Instruction on the safe and appropriate use of torches for basic jewelry-making (annealing and silver soldering)  
+
* Instruction on the safe and appropriate use of torches for basic jewelry-making (annealing and silver alloy soldering)  
 
* Instruction to use tools that may be used only with annealed metal
 
* Instruction to use tools that may be used only with annealed metal
 
* List of tools and techniques requiring annealing (e.g.: texturing, raising, folding, riveting, making headpins)
 
* List of tools and techniques requiring annealing (e.g.: texturing, raising, folding, riveting, making headpins)
−
* Reference materials
 
 
* Additional self-study resources
 
* Additional self-study resources
−
* Hands-on trials (supervised)
+
* Completion of sample project- utilizing basic soldering joints
 
* Open Studio time to practice using the tools safely and complete the sampler project required for certification
 
* Open Studio time to practice using the tools safely and complete the sampler project required for certification
 
* Certification sampler project: Described in class handout
 
* Certification sampler project: Described in class handout
 +
* [[METALS 200 Torch Use: References and Resources]]
 +
 +
''Tools used in the certification course:''
  
−
''Tools certified:''
 
−
* Butane torch
 
 
* Acetylene/AIR torch (not Oxygen/Acetylene torch)
 
* Acetylene/AIR torch (not Oxygen/Acetylene torch)
−
* MAPP Gas torch
 
 
* Soldering station - materials and tools (solder, pickle, quench, hand tools, etc.)
 
* Soldering station - materials and tools (solder, pickle, quench, hand tools, etc.)
 
* Rolling mill
 
* Rolling mill
Line 135: Line 138:
 
* Review of dapping block and disc cutter, use of punches
 
* Review of dapping block and disc cutter, use of punches
  
 +
 +
----
 +
 +
=== '''Metals 200: Torch use - Dual fuel''' ===
 +
 +
[[:Media:Acetylene_Torch_%26_Soldering_Safety.pdf|Class Handout - Acetylene Torch Soldering Safety]]
 +
 +
* Prerequisite: Metals 100-101, Metals 102, Metals 103-104
 +
* Certification: Dual Fuel torches
 +
* Duration: 90-120 minutes
 +
* Required for: casting and specific projects
 +
* How to register: You will need to contact the current shop captain to arrange an independent class. This class is only offered on a need basis.
 +
 +
<br />
 +
This is a class certification for independent use of the shop's dual fuel torch rig (oxy-acetylene).
 +
It provides:
 +
<br/>
 +
* Theory: molten metal and high heat applications
 +
* Instruction of safe use of the torch for casting and larger structural soldering.
 +
* Safety review and introduction of dual fuel specific safety equipment.
 +
* References for self study
 +
* Hands on, supervised practice.
 +
* Open Studio time to practice using the tools safely and complete the sampler project required for certification
 +
* Certification sampler project: Described in class handout
 +
* [[METALS 200 Torch Use: References and Resources]]
 +
 +
''Tools Certified:''
 +
* Oxygen-Acetylene torch rig.
 +
* crucibles (silver, bronze)
 
----
 
----
−
'''Metals 202: Torch use - Dual fuel'''
+
 
−
 
+
==300 series Technique based classes==
 +
 
 +
==='''Metals 300: Introduction to Enameling Basics, Dry processes'''===
 +
 
 +
* Prerequisite: Metals 100-101, Suggested requirements: Metals 102. 200-201
 +
* Certification: None
 +
* Duration: 3 hrs
 +
* Required for: Applying glass to metal. Metals 301-304
 +
 
 +
<br />
 +
An introduction to our [[Enameling|Enameling]] studio and the possibilities within. Students will experience hands on practice applying dry enamel to metal, creating a small object.
 +
It provides:
 +
<br />
 +
* Safety first! -Learn how to protect yourself while using this process.
 +
* Introduction to Enamel as a material.
 +
* Covers the extended uses and possible techniques with Enamel.
 +
* Demonstration of set up, application, firing and cleaning.
 +
* Discussion of Kiln use and safety. NON-Cert.
 +
* Safe hands on practice of process.
 +
* Open studio time for completion of project. (Check our website for Open studio times)
 +
* Resources for self study and practice
 +
* Materials needed for first class.
 +
----
 +
 
 +
==='''Metals 301: Advanced Enameling, Intro to wet processes'''===
 +
 
 +
* Prerequisite: Metals 300
 +
* Certification: no
 +
* Duration: 3 hours
 +
* Required for:
 +
 
 +
<br /> Description
 +
 
 +
 
 +
----
 +
 
 +
==='''Metals 302: Enameling Techniques: Champleve'''===
 +
 
 +
* Prerequisite:
 +
* Certification:
 +
* Duration:
 +
* Required for:
 +
 
 +
<br /> Description
 +
 
 +
----
 +
 
 +
==='''Metals 303: Enameling Techniques: Limoge'''===
 +
 
 
* Prerequisite:
 
* Prerequisite:
 
* Certification:
 
* Certification:
Line 146: Line 226:
  
 
----
 
----
−
'''Metals 203: Torch use - Molten metal'''
+
 
−
 
+
==='''Metals 304: Enameling Techniques: Plique a Jour'''===
 +
 
 
* Prerequisite:
 
* Prerequisite:
 
* Certification:
 
* Certification:
Line 156: Line 237:
  
 
----
 
----
−
'''Metals 300: Introduction to Chemical and Electrolytic Surface Treatments'''
+
 
 +
=== '''Metals 305: Introduction to Chemical and Electrolytic Surface Treatments''' ===
 
   
 
   
 
* Prerequisite: none
 
* Prerequisite: none
 
* Certification: no
 
* Certification: no
 
* Duration: 30 minutes
 
* Duration: 30 minutes
−
* Required for: Metals 301 (Electrolytic Etching), Metals 302 (Chemical Patinas and Inks), Metals 303 (Annodizing)
+
* Required for: Metals 306 (Electrolytic Etching), Metals 307 (Chemical Patinas and Inks)
  
−
Metals 300 is a non-certificate class to introduce the use of the shop's equipment to alter the surface appearance of metal using an electrical charge and/or chemical means. You will hear about the certificate classes offered which allow you to use this equipment independently at TinkerMill.  
+
Metals 305 is a non-certificate class to introduce the use of the shop's equipment to alter the surface appearance of metal using an electrical charge and/or chemical means. You will hear about the certificate classes offered which allow you to use this equipment independently at TinkerMill.  
 
This class explains and gives some examples of the differences between these surface treatment methods.
 
This class explains and gives some examples of the differences between these surface treatment methods.
 
It also provides a bit of theory and terminology for this practice.  
 
It also provides a bit of theory and terminology for this practice.  
−
<br />
 
  
−
Metals 300 covers:
+
Metals 305 covers:
 
* Safety first
 
* Safety first
 
* Station equipment, supplies, and conventions
 
* Station equipment, supplies, and conventions
 
* Certifications
 
* Certifications
 
* Storage and disposal of chemicals at TinkerMill
 
* Storage and disposal of chemicals at TinkerMill
−
* Demonstrations
 
 
* Examples
 
* Examples
 
* Q&A
 
* Q&A
Line 180: Line 260:
  
 
----
 
----
−
'''Metals 301: Electrolytic Etching'''
+
=== '''Metals 306: Electrolytic Etching''' ===
 
    
 
    
−
* Prerequisite:
+
* Prerequisite: Metals 305 intro to etching
−
* Certification:
+
* Certification: utilization of the etching equipment.
−
* Duration:
+
* Duration: 90-120 minutes
−
* Required for:
+
* Required for: any etching related projects.
 +
 
 +
<br />
 +
 
 +
This class is designed to teach safe practices and methods for electrolytic etching, etching with electricity.
 +
It provides:
 +
>br />
 +
* Demonstration of equipment set up
 +
* Demonstration of applying resist
 +
* Demonstration of etching
 +
* Hands on application and practice from start to finish
 +
* Certification upon completion of set up, project complete and resulting clean up.
 +
 
 +
----
 +
=== '''Metals 307: Applying Chemical Patinas and Inks''' ===
 +
 
 +
* See [[Patination|Patination Recipes]]
 +
* Prerequisite: Certification series (100-101, 102, 103-104)Safety with chemicals intro (305)
 +
* Certification: N/A
 +
* Duration: 3 hours
 +
* Required for: Coloration of metal
  
 
<br /> Description
 
<br /> Description
 +
 +
This class is designed for discovering different patination techniques, this is the process of mixed layering of chemicals to achieve different coloration effects on metal. This is not a regularly scheduled class, a safety with chemicals intro is required to use the shop chemicals.
  
 
----
 
----
−
'''Metals 302: Applying Chemical Patinas and Inks'''
+
=== '''Metals 308: Fold Forming''' ===
−
* See [[Patination|Patination Recipes]]
+
−
* Prerequisite:
+
* Prerequisite: Metals 100-101  Suggested prerequisites are Metals 102, 103-104
−
* Certification:
+
* Certification: None-Technique class
−
* Duration:
+
* Duration: 3-4 hrs
−
* Required for:
+
* Required for: construction of folded forms, using folds in jewelry and sculpture
  
 
<br /> Description
 
<br /> Description
 +
This class is designed to explore the realm of folding metal repeatedly to create interesting forms. This could create a piece all on its own or be the base for further process exploration. The tools used in this process are minimal. Classes are scheduled quarterly on our website. The class covers some basic fold patterns, proper tool use and order of operations, as well as resource suggestions, idea paths and much more.
  
 
----
 
----
−
'''Metals 303: Anodizing'''
+
=== '''Metals 309: Lost Wax Casting''' ===
 +
 
 +
* Prerequisite: Metals 100-101, suggested prerequisite classes: Metals 102, 103-104, Metals 400
 +
* Certification: candidate may be certified for independent use of casting equipment upon completion of 3 successful casts
 +
* Duration: 3 classes,2-3 hours each
 +
* Required for: casting an object in metal. Independent use of casting equipment, earned through three additional casting events.
 +
 
 +
<br />
 +
This class instructs on how to produce a metal object by way of the Lost Wax method. Wax is carved, then a mold is made of it. The mold is then placed in the kiln to melt out or lose the wax. The molten metal is then poured into the plaster cavity.
 +
It Provides:
 +
<br />
 +
* Safety First!
 +
* In depth introduction to Wax carving
 +
* In depth introduction to investment (plaster mold)
 +
* Demonstration of processes
 +
* Hands on practice and safe use of equipment.
 +
* Open studio time for additional casts required for certification. (Check our website for Open studio times)
 +
* Materials needed for first class.
 +
* List of extra personal equipment for final two classes.
  
 +
----
 +
=== '''Metals 310: Raising''' ===
 
    
 
    
−
* Prerequisite:
+
* Prerequisite: Metals 100. It is suggested that you complete the certification cycle. This will expedite your project process.
−
* Certification:
+
* Certification: No certification is offered with this class.
−
* Duration:
+
* Duration: Approximately 3 hours. If additional time is needed please consider attending our open studios.
−
* Required for:
+
* Required for: Making bowls/vessels, anticlastic and clastic forms, moving metal without compressing.
  
 
<br /> Description
 
<br /> Description
 +
This class is designed to instruct on the concept of moving metal without compression to create three dimensional objects from flat sheet using only a hammer and stake.
  
 +
It Provides:
 +
<br />
 +
*Safety First!
 +
*Tool review/intro
 +
*Resources for more in depth exploration, education, and tools
 +
*Materials needed to complete a project
 +
*Demonstration of processes
 +
*Hands on practice and ample work time
 +
*Open studio time for additional work time (Check our website for Open studio times)
 
----
 
----
−
'''Metals 400: Introduction to Kiln Use'''
 
  
 +
=== '''Metals 311: Metal inlay''' ===
 +
 
 +
* Prerequisite: Metals 100, it is also recommended to complete the certification series (101-104) to expedite your learning in this course.
 +
* Certification: None offered
 +
* Duration: 3 hours
 +
* Required for: Stone and metal inlay to jewelry and sculpture
 +
* Class offering: Twice per year, unless more interest is shown. Contact shop captain to schedule individual training.
 +
 +
<br /> Description
 +
This class is designed to instruct the process of laying metal or stone into existing metal through pressure and chemical bonding.
 +
<br />
 +
It Provides:
 +
* Instruction and demonstration of preparation and processes
 +
* Safe, hands on practice of processes
 +
* Tools and materials needed for completion of the project.
 +
* Open studio time for additional work time (Check our website for Open studio times)
 +
----
 +
=== '''Metals 312: Marriage of Metals''' ===
 
    
 
    
 
* Prerequisite:
 
* Prerequisite:
Line 222: Line 372:
  
 
----
 
----
−
'''Metals 401: Using the Metal Craft Shop Kiln'''
+
==='''Metals 313: Chase and Repousse'''===
−
 
+
 
−
* Prerequisite:
+
* Prerequisite:  
 
* Certification:
 
* Certification:
 
* Duration:
 
* Duration:
Line 230: Line 380:
  
 
<br /> Description
 
<br /> Description
 +
 +
 +
 +
 +
 +
----
 +
 +
==='''Metals 314: Stone Setting 1, Tab Setting'''===
 +
 +
*Prerequisite:
 +
*Certification:
 +
*Duration:
 +
*Required for:
 +
 +
<br /> Description
 +
 +
 +
 +
 +
 +
 +
----
 +
 +
==='''Metals 315: Stone Setting 2, Bezels'''===
 +
 +
*Prerequisite:
 +
*Certification:
 +
*Duration:
 +
*Required for:
 +
 +
<br /> Description
 +
 +
 +
 +
  
 
----
 
----
−
'''Metals 500: Introduction to Lapidary Use'''
+
 
−
 
+
==='''Metals 316: Stone Setting 3, Prongs '''===
−
* Prerequisite:
+
 
−
* Certification:
+
*Prerequisite:
−
* Duration:
+
*Certification:
−
* Required for:
+
*Duration:
 +
*Required for:
  
 
<br /> Description
 
<br /> Description
 +
 +
 +
 +
  
 
----
 
----
−
'''Metals 501: Using the Lapidary for Stone Shaping'''
+
 
 +
== '''Metals 400: Introduction to Kiln Use''' ==
 +
 
 
    
 
    
 
* Prerequisite:
 
* Prerequisite:
Line 252: Line 444:
  
 
----
 
----
−
'''Metals 600: Intro to Lathes at TinkerMill'''
+
=== '''Metals 401: Using the Metal Craft Shop Kiln''' ===
 
    
 
    
 
* Prerequisite:
 
* Prerequisite:
Line 262: Line 454:
  
 
----
 
----
 +
== '''Metals 500: Introduction to Lapidary Use''' ==
 +
 
 +
* Prerequisite: None
 +
* Certification: None
 +
* Duration: 2 hours
 +
* Required for: Metals 501: Lapidary cutting equipment
 +
 +
<br />
 +
Designed to introduce the equipment, safety pertaining to and the action of cutting and shaping stones.
 +
This class provides the following:
 +
<br />
 +
* Introduction and explanation of Lapidary.
 +
* Safety First!
 +
*
  
−
'''Metals 601: Using the Small Metal Lathe'''
+
----
 +
=== '''Metals 501: Lapidary shaping and techniques''' ===
 
    
 
    
−
* Prerequisite:
+
* Prerequisite: Metals 500
−
* Certification:
+
* Certification:Full use of the lapidary shop
−
* Duration:
+
* Duration: 2 hours
 
* Required for:
 
* Required for:
  
 
<br /> Description
 
<br /> Description

Latest revision as of 10:04, 5 August 2023

Curriculum Map v31

Metals 100: Introduction to the Jewelry and Metal Crafts Shop[edit]

Class Handout-Metals 100

  • Prerequisite: none
  • Certification: no
  • Duration: 60 minutes, online preview with in person quiz
  • Prerequisite for: All certificate classes

Metals 100 is a comprehensive introduction to the Jewelry and Metal Craft shop within TinkerMill. It is a non-certificate class but is a prerequisite for any shop certification class. It introduces the shop's tool groups, safety and guidelines, self-study resources, and examples of the types of projects best suited to this shop.

Metals 100 covers:

  • Safety first
  • Shop expectations, (Ferrous vs Nonferrous) attire,priority use, scale matters
  • Tool groups in the shop
  • Overview of curriculum paths and classes to become certified for independent tool use
  • Resources for independent study and collaboration: books, magazines, shop web portal, TM experts, organizations, and suitable project suggestions

Metals 101: Basic Hand Tools & Fabrication[edit]

Class Handout - Metals 101

  • Prerequisite: Metals 100
  • Certification: Metals 101 - Hand tools
  • Duration: 3 hours
  • Required for: Completing the certification series. Metals 102 and 103

Metals 101 is a certification class, part one. The series of classes will certify a student for independent use of the shop for basic fabrication. This class provides:

  • Instruction on the safe and appropriate use of un-powered hand tools
  • List of tools that may be used while creating the certification project.
  • Additional self-study references and list of resources: e.g.: Wire+Metals Text, Web
  • Time in class or at Open Studio times to practice using the tools and complete the sampler project required for certification
  • Certification sampler project: Described in class handout

Tools that may be used in the certification project:

  • Jeweler’s saw
  • Hole punch
  • Files
  • Sanding media
  • Hammers
  • Ring mandrel, bench block, anvil
  • Dapping punch
  • Pliers
  • Aviation shear
  • Calipers, Wire gauge, Jewelers’ rule
  • Bench pin
  • Stamps and punches
  • Jump ring maker

Metals 102: Power Tools & Uses[edit]

Class Handout - Metals 102

  • Prerequisite: Metals 100
  • Certification: Metals 102 - Power tools
  • Duration: 2 hours
  • Required for: Specified project classes

Metals 102 is a certification class for independent use of the shop's listed power tools. It provides:

  • Instruction on the safe and appropriate use of shop's power tools
  • List of tools included in this certification
  • Additional self-study references and list of resources: e.g.: Wire+Metals Text, Web
  • Time in class or at Open Studio times to practice using the tools and complete the sampler project required for certification
  • Certification sampler project: Described in class handout

Tools certified:

  • Drill press
  • Flexshaft
  • Bench Buffer
  • Belt/Disc Sander

Metals 103: Introduction to Torch use: Theory and Safety[edit]

  • Prerequisite: Metals 100 and 101
  • Certification: none
  • Duration: 60 minutes, online with quiz in person.
  • Required for: Metals 104, part three of the shop certification series.

The Metals 103 is a non-certificate class to introduce the use of the shop's torches to anneal, join or fuse metal. You will hear about the certificate classes offered, and learn when you can use the torches independently at TinkerMill. This class demonstrates the differences between soldering, brazing, and welding, annealing and tempering metal. It also provides a bit of theory and terminology for this practice.

Class Handout - Acetylene Torch Soldering Safety

Metals 103 covers:

  • Safety first
  • Soldering station equipment, supplies, and conventions
  • Torch-related certifications
  • Single fuel vs dual fuel uses
  • Flame heat principles
  • Understanding annealing
  • Examples
  • Q&A
  • Resources: books, magazines, web, TM experts, organizations, and project suggestions
  • List of tools that are included in certifications

'Reading this class online DOES NOT certify anyone to utilize the torches in the Metalcraft, Jewelry and Lapidary shop.'

Metals 104: Part three of the certification series, Torch application and safety[edit]

Class Handout - Metals 200-201

  • Prerequisite: Metals 103
  • Certification: Metals 104 final class in the certification series, complete the certification project
  • Duration: 3 hours
  • Required for: Independent use of the shop, future specific technique classes, independent fabrication, teaching classes

This class is a certification class for independent use of the shop's single fuel torch (Acetylene-Air). It provides:

  • Theory: Annealing different metals, silver soldering
  • Instruction on the safe and appropriate use of torches for basic jewelry-making (annealing and silver alloy soldering)
  • Instruction to use tools that may be used only with annealed metal
  • List of tools and techniques requiring annealing (e.g.: texturing, raising, folding, riveting, making headpins)
  • Additional self-study resources
  • Completion of sample project- utilizing basic soldering joints
  • Open Studio time to practice using the tools safely and complete the sampler project required for certification
  • Certification sampler project: Described in class handout
  • METALS 200 Torch Use: References and Resources

Tools used in the certification course:

  • Acetylene/AIR torch (not Oxygen/Acetylene torch)
  • Soldering station - materials and tools (solder, pickle, quench, hand tools, etc.)
  • Rolling mill
  • 3-in-1, bending brake
  • Review of dapping block and disc cutter, use of punches


Metals 200: Torch use - Dual fuel[edit]

Class Handout - Acetylene Torch Soldering Safety

  • Prerequisite: Metals 100-101, Metals 102, Metals 103-104
  • Certification: Dual Fuel torches
  • Duration: 90-120 minutes
  • Required for: casting and specific projects
  • How to register: You will need to contact the current shop captain to arrange an independent class. This class is only offered on a need basis.


This is a class certification for independent use of the shop's dual fuel torch rig (oxy-acetylene). It provides:

  • Theory: molten metal and high heat applications
  • Instruction of safe use of the torch for casting and larger structural soldering.
  • Safety review and introduction of dual fuel specific safety equipment.
  • References for self study
  • Hands on, supervised practice.
  • Open Studio time to practice using the tools safely and complete the sampler project required for certification
  • Certification sampler project: Described in class handout
  • METALS 200 Torch Use: References and Resources

Tools Certified:

  • Oxygen-Acetylene torch rig.
  • crucibles (silver, bronze)

300 series Technique based classes[edit]

Metals 300: Introduction to Enameling Basics, Dry processes[edit]

  • Prerequisite: Metals 100-101, Suggested requirements: Metals 102. 200-201
  • Certification: None
  • Duration: 3 hrs
  • Required for: Applying glass to metal. Metals 301-304


An introduction to our Enameling studio and the possibilities within. Students will experience hands on practice applying dry enamel to metal, creating a small object. It provides:

  • Safety first! -Learn how to protect yourself while using this process.
  • Introduction to Enamel as a material.
  • Covers the extended uses and possible techniques with Enamel.
  • Demonstration of set up, application, firing and cleaning.
  • Discussion of Kiln use and safety. NON-Cert.
  • Safe hands on practice of process.
  • Open studio time for completion of project. (Check our website for Open studio times)
  • Resources for self study and practice
  • Materials needed for first class.

Metals 301: Advanced Enameling, Intro to wet processes[edit]

  • Prerequisite: Metals 300
  • Certification: no
  • Duration: 3 hours
  • Required for:


Description


Metals 302: Enameling Techniques: Champleve[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description

Metals 303: Enameling Techniques: Limoge[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description

Metals 304: Enameling Techniques: Plique a Jour[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description

Metals 305: Introduction to Chemical and Electrolytic Surface Treatments[edit]

  • Prerequisite: none
  • Certification: no
  • Duration: 30 minutes
  • Required for: Metals 306 (Electrolytic Etching), Metals 307 (Chemical Patinas and Inks)

Metals 305 is a non-certificate class to introduce the use of the shop's equipment to alter the surface appearance of metal using an electrical charge and/or chemical means. You will hear about the certificate classes offered which allow you to use this equipment independently at TinkerMill. This class explains and gives some examples of the differences between these surface treatment methods. It also provides a bit of theory and terminology for this practice.

Metals 305 covers:

  • Safety first
  • Station equipment, supplies, and conventions
  • Certifications
  • Storage and disposal of chemicals at TinkerMill
  • Examples
  • Q&A
  • Resources: books, magazines, web, TM experts, organizations, and project suggestions
  • List of tools included in certifications

Metals 306: Electrolytic Etching[edit]

  • Prerequisite: Metals 305 intro to etching
  • Certification: utilization of the etching equipment.
  • Duration: 90-120 minutes
  • Required for: any etching related projects.


This class is designed to teach safe practices and methods for electrolytic etching, etching with electricity. It provides: >br />

  • Demonstration of equipment set up
  • Demonstration of applying resist
  • Demonstration of etching
  • Hands on application and practice from start to finish
  • Certification upon completion of set up, project complete and resulting clean up.

Metals 307: Applying Chemical Patinas and Inks[edit]

  • See Patination Recipes
  • Prerequisite: Certification series (100-101, 102, 103-104)Safety with chemicals intro (305)
  • Certification: N/A
  • Duration: 3 hours
  • Required for: Coloration of metal


Description

This class is designed for discovering different patination techniques, this is the process of mixed layering of chemicals to achieve different coloration effects on metal. This is not a regularly scheduled class, a safety with chemicals intro is required to use the shop chemicals.

Metals 308: Fold Forming[edit]

  • Prerequisite: Metals 100-101 Suggested prerequisites are Metals 102, 103-104
  • Certification: None-Technique class
  • Duration: 3-4 hrs
  • Required for: construction of folded forms, using folds in jewelry and sculpture


Description This class is designed to explore the realm of folding metal repeatedly to create interesting forms. This could create a piece all on its own or be the base for further process exploration. The tools used in this process are minimal. Classes are scheduled quarterly on our website. The class covers some basic fold patterns, proper tool use and order of operations, as well as resource suggestions, idea paths and much more.

Metals 309: Lost Wax Casting[edit]

  • Prerequisite: Metals 100-101, suggested prerequisite classes: Metals 102, 103-104, Metals 400
  • Certification: candidate may be certified for independent use of casting equipment upon completion of 3 successful casts
  • Duration: 3 classes,2-3 hours each
  • Required for: casting an object in metal. Independent use of casting equipment, earned through three additional casting events.


This class instructs on how to produce a metal object by way of the Lost Wax method. Wax is carved, then a mold is made of it. The mold is then placed in the kiln to melt out or lose the wax. The molten metal is then poured into the plaster cavity. It Provides:

  • Safety First!
  • In depth introduction to Wax carving
  • In depth introduction to investment (plaster mold)
  • Demonstration of processes
  • Hands on practice and safe use of equipment.
  • Open studio time for additional casts required for certification. (Check our website for Open studio times)
  • Materials needed for first class.
  • List of extra personal equipment for final two classes.

Metals 310: Raising[edit]

  • Prerequisite: Metals 100. It is suggested that you complete the certification cycle. This will expedite your project process.
  • Certification: No certification is offered with this class.
  • Duration: Approximately 3 hours. If additional time is needed please consider attending our open studios.
  • Required for: Making bowls/vessels, anticlastic and clastic forms, moving metal without compressing.


Description This class is designed to instruct on the concept of moving metal without compression to create three dimensional objects from flat sheet using only a hammer and stake.

It Provides:

  • Safety First!
  • Tool review/intro
  • Resources for more in depth exploration, education, and tools
  • Materials needed to complete a project
  • Demonstration of processes
  • Hands on practice and ample work time
  • Open studio time for additional work time (Check our website for Open studio times)

Metals 311: Metal inlay[edit]

  • Prerequisite: Metals 100, it is also recommended to complete the certification series (101-104) to expedite your learning in this course.
  • Certification: None offered
  • Duration: 3 hours
  • Required for: Stone and metal inlay to jewelry and sculpture
  • Class offering: Twice per year, unless more interest is shown. Contact shop captain to schedule individual training.


Description This class is designed to instruct the process of laying metal or stone into existing metal through pressure and chemical bonding.
It Provides:

  • Instruction and demonstration of preparation and processes
  • Safe, hands on practice of processes
  • Tools and materials needed for completion of the project.
  • Open studio time for additional work time (Check our website for Open studio times)

Metals 312: Marriage of Metals[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description

Metals 313: Chase and Repousse[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description



Metals 314: Stone Setting 1, Tab Setting[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description




Metals 315: Stone Setting 2, Bezels[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description



Metals 316: Stone Setting 3, Prongs [edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description



Metals 400: Introduction to Kiln Use[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description

Metals 401: Using the Metal Craft Shop Kiln[edit]

  • Prerequisite:
  • Certification:
  • Duration:
  • Required for:


Description

Metals 500: Introduction to Lapidary Use[edit]

  • Prerequisite: None
  • Certification: None
  • Duration: 2 hours
  • Required for: Metals 501: Lapidary cutting equipment


Designed to introduce the equipment, safety pertaining to and the action of cutting and shaping stones. This class provides the following:

  • Introduction and explanation of Lapidary.
  • Safety First!

Metals 501: Lapidary shaping and techniques[edit]

  • Prerequisite: Metals 500
  • Certification:Full use of the lapidary shop
  • Duration: 2 hours
  • Required for:


Description

Retrieved from "https://wiki.tinkermill.org/index.php?title=Jewelry_and_Metal_Craft_Certifications&oldid=28765"