Difference between revisions of "Woodworking"

From TinkerMill Wiki
Jump to navigation Jump to search
(36 intermediate revisions by 14 users not shown)
Line 3: Line 3:
 
''The wood shop is a great place to learn basic woodworking and more advanced woodworking skills.''
 
''The wood shop is a great place to learn basic woodworking and more advanced woodworking skills.''
  
 +
[[File:woodshop.jpg|300px|The wood shop at TinkerMill]]
  
 
== Top things you should know about the Wood Shop ==
 
== Top things you should know about the Wood Shop ==
  
  
1. '''Woodshop classes are taught every month'''.  You must take the Wood Shop Introduction and Safety class before using any of the power tools that are not hand power tools. All TinkerMill members can use hand non-powered and hand power tools.  All larger power tools, such as the drill press, chop saw among others can be used after taking a certification class.  The ShopBot and Lathe have their own separate certification classes. See the MeetUp calendar for the coming classes.   
+
1. '''Woodshop classes are taught every month'''.  You must take the Wood Shop Introduction and Safety class (Wood Shop 101) before using any of the power tools that are not hand power tools. All TinkerMill members can use hand non-powered and hand power tools.  All larger power tools, such as the drill press, chop saw among others can be used after taking a certification class.  The ShopBot, SawStop, and Lathe have their own separate certification classes. See the MeetUp calendar https://www.meetup.com/LongmontHackerSpace/events/upcoming for the coming classes.   
  
 +
2. The SawStop table saw is incredibly accurate, powerful and full of safety features.  '''It can be used after Saw Stop Certification class.'''
  
2. '''The Wood Shop community''' night is every other week and it is a great place to get advice on how to approach a project or get finer points on wood craft.
+
3. '''Every user of the space is responsible for cleaning up during and after your project.'''  There is no cleaning service.  If you don't clean up your mess another TinkerMill Member will be forced to clean up and you may loose privileges to use the space.  Follow the 105% rule - Leave the space 5% better than the way you found it.
 
 
 
 
3. The SawStop table saw is incredibly accurate, powerful and full of safety features.  '''It can be used after the wood shop certification class.'''
 
 
 
 
 
4. '''Every user of the space is responsible for cleaning up during and after your project.'''  There is no cleaning service.  If you don't clean up your mess another TinkerMill Member will be forced to clean up and you may loose privileges to use the space.  Follow the 105% rule - Leave the space 5% better than the way you found it.
 
  
 +
4.  The Wood Shop is for wood projects only. Do not use any of the tools on non-wood.  The general work bench in the main room has tools to be used for other materials.
  
 
== Tool and Room Usage ==
 
== Tool and Room Usage ==
 
* Find out if the SawStop Table Saw is in use on the https://tinkermill.slack.com/archives/machine-usage slack channel
 
* Find out if the SawStop Table Saw is in use on the https://tinkermill.slack.com/archives/machine-usage slack channel
* Find out if the Wood Shop is reserved: http://wiki.tinkermill.org/index.php/Resource_Scheduling#How_to_View_the_Resource_Calendars
+
* Find out if the Wood Shop is reserved: http://wiki.tinkermill.org/index.php/Resource_Scheduling#How_to_View_the_Resource_Calendars.  The wood shop can only be reserved for classes.
Checkout MeetUp to find out when the next class or Community Night will be held.
+
Checkout MeetUp to find out when the next class or group activity will be held.
 +
 
 +
Directions for Shopbot
 +
http://wiki.tinkermill.org/index.php/ShopBot
  
 +
Laser Cutter information
 +
http://wiki.tinkermill.org/index.php/Laser_Cutter
  
 
== Classes ==
 
== Classes ==
  
We are building classes that are offered in the Wood Shop.  The Wood Shop is built on the idea that anyone can learn wood working and some people have varying levels of previous experience.  The fictitious course numbers are provided as rough gauge of class level. The Wood Shop Introduction and Safety Class is a prerequisite for all other classes and there are no other prerequisite classes unless specifically noted. Classes are taught by volunteers and not yet taught on a regular basis besides the Introduction class that is taught about once every two weeks. If a class is of interest, contact a shop captain or message on Slack.
+
We are building classes that are offered in the Wood Shop.  The Wood Shop is built on the idea that anyone can learn wood working and some people have varying levels of previous experience.  There are no prerequisite for any class except member orientation for equipment with Tinker Access, SawStop and Laguna Lathe. Please take them in any order you are comfortable with. Classes are taught by volunteers and are scheduled based on volunteer availability.  We attempt to offer Wood Shop 101, Wood Shop 201, and Saw Stop Certification at least once a month.  Other classes may be offered based on demand. If a class is of interest, contact a shop captain or message on Slack.
  
'''1.  [[Wood Shop Introduction and Safety Class]] (Wood Shop 101)'''
+
'''1.  Wood Shop 101'''
  
Everyone using the space must take this class to learn how to use the basic tools and safety features of the shop.  Learn how to use the drill press, belt sander, band saw, miter saw (aka chop saw), and dust collection system.  This class also includes an optional introduction to using the table saw. This class is a prerequisite for all other classes.
+
Learn how to use the drill press, belt sander, band saw, miter saw (aka chop saw), panel saw and dust collection system.  Also covers shop safety and usage policies.
 +
Class handout [[http://wiki.tinkermill.org/index.php/Wood_Shop_Introduction_and_Safety_Class]]
  
 +
'''2.  Wood Shop 201'''
  
'''2. Wood Shop Supreme (Wood Shop 201)'''
+
This course covers how to use more advanced tools in the wood shop such as the router, planer, joiner, and drum sander. Also covers shop safety and usage policies.
 +
Pre-class assignment [[http://wiki.tinkermill.org/index.php/Wood_Shop_Supreme]]
 +
Class handout [https://docs.google.com/document/d/1nHZ7NX_ag5ysC2y6MGOEVLIvm6SJWUU8VW1SmrDZu78/edit?usp=sharing]
  
Learn how to dimension a board and make a picture frameThis course covers how to use more advanced tools in the wood shop such as the router, planer, joiner, and drum sander.
+
'''3Saw Stop Certification (requires member orientation with Tinker Access fob)'''
  
 +
Learn how to use the table saw.  Safety orientation.  Adjustments on  the saw, change blades, install dado stack, change the SawStop brake cartridge, building special sleds and fixtures to enhance your knowledge of the capabilities of the table saw.  Tinkermill membership is required to use the saw outside of this class. Also covers shop safety and usage policies. Class handout [https://docs.google.com/document/d/1-Z1Ze7um0iRwZHiUwQRAk2SxSPWqWKvaYfNXvXR7JNE/edit]
  
'''3Make a Wooden Spoon (Wood Shop 105)'''
+
'''4Look on Meetup or postings in the wood shop for other classes.'''
  
Learn how to use chisels and gouges to shape wood by hand.  Simple power tools such as the band saw and belt sander.  The rough contours are created and then progressively finer sandpaper is used to smooth the wood.  Finally the spoon is sealed with a food safe finish. 
 
  
 +
'''5. Lathe Certification  (requires member orentation with Tinker Access fob)'''
  
'''4. Lathe Certification (Wood Shop 110)'''
+
Get certified to use the LatheThis is a specialized tool and requires specific safety instruction. Also covers shop safety and usage policies.
  
Get certified to use the LatheThis is a specialized tool and requires specific safety instruction.
+
The dust collection tools are vital for maintaining a safe environment in the wood shop. Everyone should be familiar with their function and appropriate use:
 +
* [[Dust Collector]]
 +
* [[Media:1791330_man_EN.pdf | Air Filtration System]]
 +
** [[https://www.youtube.com/watch?v=9_9GVW1NLco Video to change the Powermatic air filter]]
  
  
'''5. Make a Birdhouse'''
+
Any member may use:
 +
* [[Hand Tools]]
 +
* [[Hand Power Tools]]
 +
* [[Panel Press]]
  
 +
==Tools Requiring Certification==
 +
The below tools require certification before use. Members can use these tools at any time once they are certifified for use on the individual tool.  In most cases, certification is through a hands on-class.
  
'''6. Make a Jewelry Box (Wood Shop 205)'''
+
   
 +
(Wood Shop 101):
 +
* [[Miter Saw ]]
 +
* [[Belt Sander]]
 +
* [[Band Saw]]
 +
* [[Drill Press]]
 +
* [[Panel Saw]]
  
Learn about rough stock selection, resawing stock on the band saw, and designing projects with wood movement in mind while building a small box (approx. 4"x4"x6"). The techniques in this class can be easily applied to larger boxes and chests as well as bookshelves and things with drawers. Approximately 10-12 hours of shop time spread over 4 sessions. Some experience or woodshop 201 recommended.
 
  
== Tools ==
+
  (Wood Shop 201):
Here is a non comprehensive list of tools. Read up here to find operations manuals and some usage guidelines.
 
* [[Hand Tools]]
 
* [[Hand Power Tools]]
 
* [[Table Saw]] aka the [[SawStop]]
 
 
* [[Thickness Planer]]
 
* [[Thickness Planer]]
* [[Joiner]]
+
* [[Jointer]]
* [[Miter (Chop) Saw ]]
 
* [[Belt Sander]]
 
* [[Lathe]]
 
* [[Band Saw]]
 
 
* [[Router Table]]
 
* [[Router Table]]
* [[Drill Press]]
 
 
* [[Drum Sander]]
 
* [[Drum Sander]]
  
 +
(SawStop Certification)
 +
* [[Table Saw]] [https://www.sawstop.com/] aka the [[SawStop]]
 +
 +
(Lathe Certification Also covers shop safety and usage policies.)
 +
* [[Laguna Lathe]]
  
While this tool is not in the Wood Shop, it is a great resource for sharpening tools in the shop.
 
  
 
*[[Tormek]] - This is a wet grinding stone and is capable of producing finely sharpened tools.
 
*[[Tormek]] - This is a wet grinding stone and is capable of producing finely sharpened tools.
Line 78: Line 93:
 
[[Category:Woodshop]]
 
[[Category:Woodshop]]
 
<p>
 
<p>
 +
 +
== How to Help ==
 +
We always need folks to help maintain this volunteer space. Items marked (anyone) can be done by anyone who has completed Wood Shop 101.
 +
 +
 +
'''Weekly Maintenance'''
 +
 +
1. Empty shop vacuum and vacuum under the miter saw.
 +
 +
2. Clean out cabinet on SawStop. Dust and debris accumulates inside the cabinet. Vacuumm it up.(anyone)
 +
 +
3. Knock out filter on Mobile Dust Collector. Empty Bag. (needed more than weekly) (anyone)
 +
 +
4. Swap blade on SawStop let soak in fluid. (Shop Captains, Saw Stop Attendees)
 +
 +
5. Dust collector empty (anyone)
 +
 +
6. Swap Blade on Compound Miter Saw (Shop Captains)
 +
 +
7. Inspect Jointer and Planer blades for nicks (Wood Shop 201)
 +
 +
8. Inspect Powermatic Air Filter and clean if necessary. (anyone) [[https://www.youtube.com/watch?v=9_9GVW1NLco Video to change the Powermatic air filter]]
  
 
== Resources ==
 
== Resources ==
Line 85: Line 122:
  
 
[https://www.youtube.com/user/stevinmarin Great Series of Videos on all wood working topics]
 
[https://www.youtube.com/user/stevinmarin Great Series of Videos on all wood working topics]
 +
  
  
Line 106: Line 144:
  
 
http://austinhardwoods.com/lumber.shtml
 
http://austinhardwoods.com/lumber.shtml
 +
 +
'''Woodworking Tools'''
 +
 +
[https://www.youtube.com/watch?v=JM_AExPBSmU Dewalt DWE7491rs ]
  
  
  
 
Back to: [[Main Page]]</p>
 
Back to: [[Main Page]]</p>

Revision as of 21:52, 25 August 2019

The TinkerMill has a wonderful and complete woodworking shop. We communicate using Slack in #woodshop for tool repair status and event coordination.

The wood shop is a great place to learn basic woodworking and more advanced woodworking skills.

The wood shop at TinkerMill

Top things you should know about the Wood Shop

1. Woodshop classes are taught every month. You must take the Wood Shop Introduction and Safety class (Wood Shop 101) before using any of the power tools that are not hand power tools. All TinkerMill members can use hand non-powered and hand power tools. All larger power tools, such as the drill press, chop saw among others can be used after taking a certification class. The ShopBot, SawStop, and Lathe have their own separate certification classes. See the MeetUp calendar https://www.meetup.com/LongmontHackerSpace/events/upcoming for the coming classes.

2. The SawStop table saw is incredibly accurate, powerful and full of safety features. It can be used after Saw Stop Certification class.

3. Every user of the space is responsible for cleaning up during and after your project. There is no cleaning service. If you don't clean up your mess another TinkerMill Member will be forced to clean up and you may loose privileges to use the space. Follow the 105% rule - Leave the space 5% better than the way you found it.

4. The Wood Shop is for wood projects only. Do not use any of the tools on non-wood. The general work bench in the main room has tools to be used for other materials.

Tool and Room Usage

Checkout MeetUp to find out when the next class or group activity will be held.

Directions for Shopbot http://wiki.tinkermill.org/index.php/ShopBot

Laser Cutter information http://wiki.tinkermill.org/index.php/Laser_Cutter

Classes

We are building classes that are offered in the Wood Shop. The Wood Shop is built on the idea that anyone can learn wood working and some people have varying levels of previous experience. There are no prerequisite for any class except member orientation for equipment with Tinker Access, SawStop and Laguna Lathe. Please take them in any order you are comfortable with. Classes are taught by volunteers and are scheduled based on volunteer availability. We attempt to offer Wood Shop 101, Wood Shop 201, and Saw Stop Certification at least once a month. Other classes may be offered based on demand. If a class is of interest, contact a shop captain or message on Slack.

1. Wood Shop 101

Learn how to use the drill press, belt sander, band saw, miter saw (aka chop saw), panel saw and dust collection system. Also covers shop safety and usage policies. Class handout [[1]]

2. Wood Shop 201

This course covers how to use more advanced tools in the wood shop such as the router, planer, joiner, and drum sander. Also covers shop safety and usage policies. Pre-class assignment [[2]] Class handout [3]

3. Saw Stop Certification (requires member orientation with Tinker Access fob)

Learn how to use the table saw. Safety orientation. Adjustments on the saw, change blades, install dado stack, change the SawStop brake cartridge, building special sleds and fixtures to enhance your knowledge of the capabilities of the table saw. Tinkermill membership is required to use the saw outside of this class. Also covers shop safety and usage policies. Class handout [4]

4. Look on Meetup or postings in the wood shop for other classes.


5. Lathe Certification (requires member orentation with Tinker Access fob)

Get certified to use the Lathe. This is a specialized tool and requires specific safety instruction. Also covers shop safety and usage policies.

The dust collection tools are vital for maintaining a safe environment in the wood shop. Everyone should be familiar with their function and appropriate use:


Any member may use:

Tools Requiring Certification

The below tools require certification before use. Members can use these tools at any time once they are certifified for use on the individual tool. In most cases, certification is through a hands on-class.


(Wood Shop 101):


(Wood Shop 201):
(SawStop Certification)
(Lathe Certification Also covers shop safety and usage policies.)


  • Tormek - This is a wet grinding stone and is capable of producing finely sharpened tools.

How to Help

We always need folks to help maintain this volunteer space. Items marked (anyone) can be done by anyone who has completed Wood Shop 101.


Weekly Maintenance

1. Empty shop vacuum and vacuum under the miter saw.

2. Clean out cabinet on SawStop. Dust and debris accumulates inside the cabinet. Vacuumm it up.(anyone)

3. Knock out filter on Mobile Dust Collector. Empty Bag. (needed more than weekly) (anyone)

4. Swap blade on SawStop let soak in fluid. (Shop Captains, Saw Stop Attendees)

5. Dust collector empty (anyone)

6. Swap Blade on Compound Miter Saw (Shop Captains)

7. Inspect Jointer and Planer blades for nicks (Wood Shop 201)

8. Inspect Powermatic Air Filter and clean if necessary. (anyone) [Video to change the Powermatic air filter]

Resources

Further learning and where to find supplies

Learning

Great Series of Videos on all wood working topics


Supplies

1. Stan’s Hardwood

http://www.longmonthardwood.com/


2. Woodcraft in Loveland

http://www.woodcraft.com/stores/566/woodcraft-of-loveland.aspx


3. Austin Hardwoods in Denver (right off I-25 at Broadway) Many species stocked in thicknesses from 4/4 through 16/4.

Will mill rough stock to S3S (three sides flat, smooth and square to each other) for $0.30/bf

http://austinhardwoods.com/lumber.shtml

Woodworking Tools

Dewalt DWE7491rs


Back to: Main Page