Difference between revisions of "Wood Shop Supreme"

From TinkerMill Wiki
Jump to navigation Jump to search
Line 6: Line 6:
  
 
'''Class Outline and Pre-assignment'''   
 
'''Class Outline and Pre-assignment'''   
 +
 
https://docs.google.com/document/d/1s3g87ajDWDsLbJLqekXnJmbWm0Ahz7vJNrfRPs4EJQY/edit?usp=sharing
 
https://docs.google.com/document/d/1s3g87ajDWDsLbJLqekXnJmbWm0Ahz7vJNrfRPs4EJQY/edit?usp=sharing
 +
  
 
Tools covered in this class:
 
Tools covered in this class:

Revision as of 11:23, 19 May 2018

The pre-req for this class is Wood Shop 101, the introduction course. During this class we will build a picture frame using some of the more advance tools.

Taking a standard stock piece of hardwood, we will use the joiner to obtain a flat side, the plainer to get a defined thickness, the router to obtain a wood profile and the drum sander to obtain a smooth finish. The goal of the class is to create a profiled board from which to create a picture frame.

Please watch these videos and read the articles linked in this handout before the class to gain the basics of these tools. During the class we will go over some the tips and tricks for our tools and get hands-on experience.

Class Outline and Pre-assignment

https://docs.google.com/document/d/1s3g87ajDWDsLbJLqekXnJmbWm0Ahz7vJNrfRPs4EJQY/edit?usp=sharing


Tools covered in this class:

--Jointer--


--Router (New one coming but read over this)--


--Drum Sander--


--Planer (aka - Thicknesser)--