File list
This special page shows all uploaded files.
First page |
Previous page |
Next page |
Last page |
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 22:12, 10 August 2017 | MaterialSources.odt (file) |  |
3 KB | Richard W | 1 | |
| 12:30, 18 July 2016 | TinkerMill Logo - 130 x 65.730 on 150 x 150 Background.png (file) |  |
3 KB | Admin | 1 | |
| 17:17, 17 February 2017 | Inkscape-DXF-save-1.PNG (file) |  |
5 KB | Rcalme | 1 | |
| 17:05, 23 July 2019 | ReplaceNeedle1.png (file) |  |
5 KB | LynneN | 1 | |
| 13:40, 23 July 2019 | PhysicalButtons.png (file) |  |
5 KB | LynneN | 1 | |
| 17:15, 17 February 2017 | Inkscape-document-properties-mm.PNG (file) |  |
5 KB | Rcalme | 1 | |
| 17:16, 17 February 2017 | LaserCutLayers.PNG (file) |  |
6 KB | Rcalme | 1 | |
| 16:38, 23 July 2019 | ThreadPath3.png (file) |  |
6 KB | LynneN | 1 | |
| 17:00, 23 July 2019 | InsertBobbin2.png (file) |  |
7 KB | LynneN | 1 | |
| 17:00, 23 July 2019 | InsertBobbin1.png (file) |  |
9 KB | LynneN | 1 | |
| 23:31, 11 January 2017 | Gear-inlay-tutorial-0.25.png (file) |  |
9 KB | Cedarm | 1 | |
| 23:31, 11 January 2017 | Gear-inlay-tutorial+0.75.png (file) |  |
9 KB | Cedarm | 1 | |
| 11:03, 24 July 2019 | RemoveNeedlePlate.png (file) |  |
10 KB | LynneN | 1 | |
| 17:10, 23 July 2019 | EmbroideryArmAdjustment.png (file) |  |
12 KB | LynneN | 1 | |
| 17:15, 17 February 2017 | InkscapeLayers.PNG (file) |  |
12 KB | Rcalme | 1 | |
| 10:30, 27 July 2016 | Laser origin 1.png (file) |  |
13 KB | Ron.Thomas | Setting laser origin in Rabbit Laser software. | 1 |
| 17:14, 23 July 2019 | HoopUpsideDown.png (file) |  |
14 KB | LynneN | 1 | |
| 16:39, 23 July 2019 | ThreadPath3b.png (file) |  |
14 KB | LynneN | 1 | |
| 16:39, 23 July 2019 | ThreadPath4.png (file) |  |
18 KB | LynneN | 1 | |
| 16:38, 23 July 2019 | ThreadPath2.png (file) |  |
18 KB | LynneN | 1 | |
| 16:39, 23 July 2019 | ThreadPath5.png (file) |  |
18 KB | LynneN | 1 | |
| 11:01, 24 November 2018 | Foundry Checklist.docx (file) | |
19 KB | Amy Weinstein | Step by step safety procedures for foundry sand casting. | 1 |
| 16:55, 23 July 2019 | RemoveBobbin1.png (file) |  |
19 KB | LynneN | 1 | |
| 16:56, 23 July 2019 | RemoveBobbin2.png (file) |  |
19 KB | LynneN | 1 | |
| 17:14, 23 July 2019 | AttachHoop2.png (file) |  |
21 KB | LynneN | 1 | |
| 00:18, 12 January 2017 | Gear-inlay-tutorial-result-undersized.png (file) |  |
21 KB | Cedarm | Green outline is the result after reducing size of black object to account for cutting kerf. | 1 |
| 14:42, 23 July 2019 | ReservedNeedle.png (file) |  |
23 KB | LynneN | 1 | |
| 17:05, 23 July 2019 | ReplaceNeedle2.png (file) |  |
24 KB | LynneN | 1 | |
| 00:08, 12 January 2017 | Gear-inlay-tutorial-result-oversized.png (file) |  |
24 KB | Cedarm | Blue outline is result after increasing size of black object to account for cutting kerf. | 1 |
| 17:15, 17 February 2017 | Inkscape-grid-setting-mm.PNG (file) |  |
24 KB | Rcalme | 1 | |
| 13:50, 23 July 2019 | AutomaticNeedleThreader.png (file) |  |
25 KB | LynneN | 1 | |
| 10:30, 27 July 2016 | Laser origin 2.png (file) |  |
26 KB | Ron.Thomas | Setting laser origin in Rabbit Laser software. | 1 |
| 17:55, 6 December 2016 | Swc.pdf (file) |  |
28 KB | Lynne.Davis | Stranded Wire Chart | 1 |
| 17:17, 17 February 2017 | Inkscape-DXF-save-2.PNG (file) |  |
28 KB | Rcalme | 1 | |
| 12:19, 18 July 2019 | PatternSelectionPage.png (file) |  |
28 KB | LynneN | 1 | |
| 12:42, 22 July 2019 | PutWordOnArc.png (file) |  |
29 KB | LynneN | 1 | |
| 13:00, 22 July 2019 | LetterSpacingScreen.png (file) |  |
30 KB | LynneN | 1 | |
| 17:14, 23 July 2019 | AttachHoop.png (file) |  |
31 KB | LynneN | 1 | |
| 14:47, 23 July 2019 | ReservedNeedleExample.png (file) |  |
31 KB | LynneN | 1 | |
| 12:37, 22 July 2019 | ChooseAFont.png (file) |  |
31 KB | LynneN | 1 | |
| 16:39, 22 July 2019 | RotateDesign.png (file) |  |
31 KB | LynneN | 1 | |
| 17:01, 23 July 2019 | InsertBobbin3.png (file) |  |
32 KB | LynneN | 1 | |
| 00:14, 12 January 2017 | Gear-inlay-tutorial-result.png (file) |  |
32 KB | Cedarm | Blue and green outlines are the result after increasing and reducing size of black object to account for cutting kerf. | 1 |
| 16:02, 22 July 2019 | ResizeDesign.png (file) |  |
33 KB | LynneN | 1 | |
| 10:47, 24 July 2019 | LockButton.png (file) |  |
33 KB | LynneN | 1 | |
| 10:40, 24 July 2019 | ManualStops.png (file) |  |
34 KB | LynneN | 1 | |
| 13:45, 23 July 2019 | MoveStitches.png (file) |  |
34 KB | LynneN | 1 | |
| 11:21, 24 July 2019 | AppliqueColors.png (file) |  |
35 KB | LynneN | 1 | |
| 17:15, 17 February 2017 | Inkscape-Tools-Geometric-BB.PNG (file) |  |
35 KB | Rcalme | 1 | |
| 12:40, 22 July 2019 | ChooseYourLetters.png (file) |  |
35 KB | LynneN | 1 |
First page |
Previous page |
Next page |
Last page |
