Difference between revisions of "Machine Shop"

From TinkerMill Wiki
Jump to navigation Jump to search
(Added typical specs for band saw blade)
(One intermediate revision by one other user not shown)
Line 7: Line 7:
 
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br>
 
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br>
  
Band Saw<br>
+
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - [https://www.mcmaster.com/catalog/4179A528 McMaster-Carr])<br>
  
 
Drill Press<br>
 
Drill Press<br>
Line 31: Line 31:
  
 
*[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]]
 
*[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]]
 +
 +
*[[Mitek training|Class materials and operating procedure for CNC mill]]
  
 
=== Materials ===
 
=== Materials ===

Revision as of 10:56, 7 May 2020

Machines in Tinkermill Machine Shop

Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling

Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)

Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.

Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)

Drill Press

Pedestal Grinder

Deckle single flute grinder - Operating Manual

Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual

52" sheet metal roll/press brake/shear tool - Operating Manual

20k pound hydraulic press, misc. arbor presses, etc.

Sheet metal hand tools

Tooling, granite plate, inspection tools.

Resources

Class Notes

Materials

Machine Shop Projects

Tool Selection

Back to: Main Page