Difference between revisions of "Machine Shop"

From TinkerMill Wiki
Jump to navigation Jump to search
(21 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
'''Machines in Tinkermill Machine Shop'''
 
'''Machines in Tinkermill Machine Shop'''
  
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling<br/>
+
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling<br>
[[Media:Fusion-mitek.pdf|Notes on Fusion/Mitek]]
 
  
Bridgeport manual milling machine (two, one student grade, one tool room grade)
+
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)<br>
  
Wade tool room lathe  (1" and under, slated for replacement)
+
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br>
  
Deckle single flute grinder
+
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - [https://www.mcmaster.com/catalog/4179A528 McMaster-Carr])<br>
  
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder
+
Drill Press<br>
  
28" throat vertical bandsaw
+
Pedestal Grinder<br>
  
Horizontal cut off saw
+
Deckle single flute grinder - [[Media:DECKEL_OPERATING_INSTRUCTIONS.pdf|Operating Manual]]
  
2hp drill press
+
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - [[Media:Challenger.pdf|Operating Manual]]
  
52" sheet metal roll/press brake/shear tool - PDF of manual http://wiki.tinkermill.org/index.php?title=Special:UserLogin&returnto=Machine_Shop
+
52" sheet metal roll/press brake/shear tool - [[Media:Shear.pdf|Operating Manual]]
  
50k pound hydraulic press, misc. arbor presses, etc.
+
20k pound hydraulic press, misc. arbor presses, etc.
  
 
Sheet metal hand tools
 
Sheet metal hand tools
Line 26: Line 25:
 
Tooling, granite plate, inspection tools.
 
Tooling, granite plate, inspection tools.
  
 +
== Resources ==
  
'''Machine Shop Projects'''<br/>
+
=== Class Notes ===
[[Media:Tubalcain_Tap_Follower_Drawing.pdf|Spring-Loaded Tap Follower]]
+
*[[Media:Nardini_1440E_Lathe_Class_-_101.pdf|Nardini Lathe Class 101]]
 +
 
 +
*[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]]
 +
 
 +
*[[Mitek training|Class materials and operating procedure for Mitek CNC mill]]
 +
 
 +
=== Materials ===
 +
*[[Sourcing Materials]]
 +
 
 +
=== Machine Shop Projects ===
 +
*[[Media:Tubalcain_Tap_Follower_Drawing.pdf|Spring-Loaded Tap Follower]]
 +
 
 +
=== Tool Selection ===
 +
*[https://www.ctemag.com/news/articles/understanding-identification-system-indexable-inserts Understanding the Identification System for Indexable Inserts]
 +
 
 +
 
 +
[[Category:Machine Shop]]
 +
Back to: [[Main Page]]

Revision as of 17:34, 4 February 2021

Machines in Tinkermill Machine Shop

Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling

Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)

Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.

Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)

Drill Press

Pedestal Grinder

Deckle single flute grinder - Operating Manual

Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual

52" sheet metal roll/press brake/shear tool - Operating Manual

20k pound hydraulic press, misc. arbor presses, etc.

Sheet metal hand tools

Tooling, granite plate, inspection tools.

Resources

Class Notes

Materials

Machine Shop Projects

Tool Selection

Back to: Main Page