Difference between revisions of "Machine Shop"

From TinkerMill Wiki
Jump to navigation Jump to search
(7 intermediate revisions by 3 users not shown)
Line 5: Line 5:
 
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)<br>
 
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)<br>
  
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading gears on both are for inch threads.<br>
+
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br>
  
Band Saw<br>
+
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - [https://www.mcmaster.com/catalog/4179A528 McMaster-Carr])<br>
  
 
Drill Press<br>
 
Drill Press<br>
Line 26: Line 26:
  
 
== Resources ==
 
== Resources ==
 +
 +
=== Class Notes ===
 +
*[[Media:Nardini_1440E_Lathe_Class_-_101.pdf|Nardini Lathe Class 101]]
 +
 +
*[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]]
 +
 +
*[[Mitek training|Class materials and operating procedure for Mitek CNC mill]]
  
 
=== Materials ===
 
=== Materials ===

Revision as of 17:34, 4 February 2021

Machines in Tinkermill Machine Shop

Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling

Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)

Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.

Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)

Drill Press

Pedestal Grinder

Deckle single flute grinder - Operating Manual

Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual

52" sheet metal roll/press brake/shear tool - Operating Manual

20k pound hydraulic press, misc. arbor presses, etc.

Sheet metal hand tools

Tooling, granite plate, inspection tools.

Resources

Class Notes

Materials

Machine Shop Projects

Tool Selection

Back to: Main Page