Difference between revisions of "Machine Shop"

From TinkerMill Wiki
Jump to navigation Jump to search
(Diabase machines gone)
(12 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling<br>
 
Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling<br>
  
Bridgeport manual milling machine (two, one student grade, one tool room grade)
+
Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)<br>
  
Nardini Lathe<br>
+
Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.<br>
  
Deckle single flute grinder<br>
+
Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - [https://www.mcmaster.com/catalog/4179A528 McMaster-Carr])<br>
[[Media:DECKEL_OPERATING_INSTRUCTIONS.pdf|Deckle Operating Manual]]
 
  
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder<br>
+
Drill Press<br>
[[Media:Challenger.pdf|Surface Grinder Operating Manual]]
 
  
52" sheet metal roll/press brake/shear tool<br>
+
Pedestal Grinder<br>
[[Media:Shear.pdf|Shear/Brake/Roll Operating Manual]]
+
 
 +
Deckle single flute grinder - [[Media:DECKEL_OPERATING_INSTRUCTIONS.pdf|Operating Manual]]
 +
 
 +
Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - [[Media:Challenger.pdf|Operating Manual]]
 +
 
 +
52" sheet metal roll/press brake/shear tool - [[Media:Shear.pdf|Operating Manual]]
  
 
20k pound hydraulic press, misc. arbor presses, etc.
 
20k pound hydraulic press, misc. arbor presses, etc.
Line 22: Line 25:
 
Tooling, granite plate, inspection tools.
 
Tooling, granite plate, inspection tools.
  
[[File:Material_Sources.pdf|Material Sources]]
+
== Resources ==
 +
 
 +
=== Class Notes ===
 +
*[[Media:Nardini_1440E_Lathe_Class_-_101.pdf|Nardini Lathe Class 101]]
 +
 
 +
*[[Media:ConventionalMillingVsClimbMilling.pdf|Conventional vs Climb Milling]]
 +
 
 +
*[[Mitek training|Class materials and operating procedure for Mitek CNC mill]]
 +
 
 +
=== Materials ===
 +
*[[Sourcing Materials]]
 +
 
 +
=== Machine Shop Projects ===
 +
*[[Media:Tubalcain_Tap_Follower_Drawing.pdf|Spring-Loaded Tap Follower]]
 +
 
 +
=== Tool Selection ===
 +
*[https://www.ctemag.com/news/articles/understanding-identification-system-indexable-inserts Understanding the Identification System for Indexable Inserts]
 +
 
  
'''Machine Shop Projects'''<br>
+
[[Category:Machine Shop]]
[[Media:Tubalcain_Tap_Follower_Drawing.pdf|Spring-Loaded Tap Follower]]
+
Back to: [[Main Page]]

Revision as of 17:34, 4 February 2021

Machines in Tinkermill Machine Shop

Mitek CNC vertical milling machine, 15"(Y)x28"(X)x15"(Z) NMTB40 tooling

Two Manual milling machines (One Bridgeport brand, one SuperMax YC-1 1/2VA - a Bridgeport clone)

Two Nardini 1640 Lathes. The tool posts on both are BXA. Threading is inch on one and metric on the other.

Band Saw (blade length is 93-1/2", typical width is 1/2", typical thickness is 0.025", and typical tooth count is 14 TPI - McMaster-Carr)

Drill Press

Pedestal Grinder

Deckle single flute grinder - Operating Manual

Bovar-Schultz Challenge 6-18 Hydraulic Surface Grinder - Operating Manual

52" sheet metal roll/press brake/shear tool - Operating Manual

20k pound hydraulic press, misc. arbor presses, etc.

Sheet metal hand tools

Tooling, granite plate, inspection tools.

Resources

Class Notes

Materials

Machine Shop Projects

Tool Selection

Back to: Main Page