Difference between revisions of "Laser Cutter Settings"

From TinkerMill Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
==General Cutting Settings==
 
==General Cutting Settings==
 +
These settings are for general purpose use to cut materials. They should be expected to fully cut the material, but '''ALWAYS''' test settings to verify they work with your specific material!
 +
====Woods====
 +
{| class="wikitable"
 +
!Material
 +
!Thickness
 +
!Speed
 +
!Power
 +
!Passes
 +
!Notes
 +
|}
 +
 +
====Polymers====
 +
{| class="wikitable"
 +
!Material
 +
!Thickness
 +
!Speed
 +
!Power
 +
!Passes
 +
!Notes
 +
|}
 +
 +
====Paper Materials====
 +
{| class="wikitable"
 +
!Material
 +
!Thickness
 +
!Speed
 +
!Power
 +
!Passes
 +
!Notes
 +
|}
  
 +
====Miscellaneous====
 
{| class="wikitable"
 
{| class="wikitable"
 
!Material
 
!Material
Line 7: Line 38:
 
!Power
 
!Power
 
!Passes
 
!Passes
 +
!Notes
 
|}
 
|}
  
 
==General Engraving Settings==
 
==General Engraving Settings==
 +
The settings here are for general-purpose use and are '''NOT''' calibrated for depth! '''ALWAYS''' test settings to verify them!
 +
====Woods====
 +
{| class="wikitable"
 +
!Material
 +
!Thickness
 +
!Speed
 +
!Power
 +
!Passes
 +
!Notes
 +
|}
  
 +
====Polymers====
 
{| class="wikitable"
 
{| class="wikitable"
 
!Material
 
!Material
 +
!Thickness
 +
!Speed
 +
!Power
 +
!Passes
 +
!Notes
 +
|}
 +
 +
====Paper Materials====
 +
{| class="wikitable"
 +
!Material
 +
!Thickness
 +
!Speed
 +
!Power
 +
!Passes
 +
!Notes
 +
|}
 +
 +
====Miscellaneous====
 +
{| class="wikitable"
 +
!Material
 +
!Thickness
 
!Speed
 
!Speed
 
!Power
 
!Power
 
!Passes
 
!Passes
 +
!Notes
 
|}
 
|}
  

Revision as of 17:20, 3 June 2017

General Cutting Settings

These settings are for general purpose use to cut materials. They should be expected to fully cut the material, but ALWAYS test settings to verify they work with your specific material!

Woods

Material Thickness Speed Power Passes Notes

Polymers

Material Thickness Speed Power Passes Notes

Paper Materials

Material Thickness Speed Power Passes Notes

Miscellaneous

Material Thickness Speed Power Passes Notes

General Engraving Settings

The settings here are for general-purpose use and are NOT calibrated for depth! ALWAYS test settings to verify them!

Woods

Material Thickness Speed Power Passes Notes

Polymers

Material Thickness Speed Power Passes Notes

Paper Materials

Material Thickness Speed Power Passes Notes

Miscellaneous

Material Thickness Speed Power Passes Notes

Detailed Settings

Below are in-depth engraving tests that have been contributed by various members. Unlike the general purpose settings, these settings include the approximate depth to which the engraving will be cut, which may be useful for things such as stamps.

Back to: Main Page