Jewelry and Metalcraft
Jump to navigation
Jump to search
Contents
- 1 Equipment List
- 1.1 Hand Tools
- 1.2 Bench Tools
- 1.3 Soldering station
- 1.4 Patina setup
- 1.5 Electro-etch setup
- 1.6 Firing Setup
- 1.7 Enameling Setup (On Loan to TinkerMill) ===
- 1.8 Casting ===
- 1.9 Lapidary (On Loan to TinkerMill) ===
- 1.10 Lathe (On Loan to TinkerMill) ===
- 1.11 Hydraulic Press
- 1.12 Rolling Mill
- 1.13 Shear
- 1.14 Bending brake
Equipment List
Hand Tools
- Hammers-assorted
- Pliers-assorted
- Files-assorted
- Files-assorted needle
- Sanding sticks
- Jeweler's saw (x2)
- Calipers
- Hand shears, tin snips - assorted
- Hole punch (Prat and Whitney)
- Bench blocks
Bench Tools
- Flex Shaft w/assorted bits
- Dremel w/drill press stand
- Bench pins
- Small vice/bench block (x2)
- Large vice
- Large anvil
- Belt sander
- Bench grinder/wire wheel
- Dapping block and punches
Soldering station
- Butane torch
- Oxygen/Acetylene torch
- MAPP gas torch
- Pickle pot, chemical
- Tongs, tweezers
- Rinse pot
- Cleaning supplies
Patina setup
- Glass mixing jars and dishes
- Brushes/applicators
- Chemicals
- Steel wool
Electro-etch setup
- DC Power supply
- "D" battery holders
- Battery clips
- Etching vessels
- Resist materials
- Chemicals
Firing Setup
- Kiln (On Loan to TinkerMill)
- Programmable controller
Enameling Setup (On Loan to TinkerMill) ===
- Sifting screens
- Enamel powders
- Enamel holding agent (e.g. Kleerfire)
- Kiln trivets, wire screen
Casting ===
- Centrifugal rig (On Loan to TinkerMill)
- Sand casting kit with casting frame, crucible, release agent, pre-mixed casting sand, tongs
Lapidary (On Loan to TinkerMill) ===
- Trim saw, cab forming wheels (Lortone LU6X Combination Unit) refurbished
Lathe (On Loan to TinkerMill) ===
Hydraulic Press
- (to be converted from battery casing press to custom forming tool)
Rolling Mill
- Small Pepe
- Part of 3-in-One
Shear
- Part of 3-in-1
Bending brake
- Part of 3-in-1
- Stand-alone brake (larger than 3-in-1)
