Difference between revisions of "Ham Radio"

From TinkerMill Wiki
Jump to navigation Jump to search
Line 1: Line 1:
The main antenna is a Mosley Pro-67 mounted at 65 feet on a Rohn-25G tower. This antenna covers 40m (3el), 30m (1el), 20m (3el), 17m (2el), 15m(3el), 12m (2el) and 10m (4el). The antenna is turned with a Yaesu G2800 rotor.
+
The main antenna is a Mosley Pro-67 mounted at 65 feet on a Rohn-25G tower. This antenna covers 40m (3el), 30m (1el), 20m (3el), 17m (2el), 15m(3el), 12m (2el) and 10m (4el). The antenna is turned with a Yaesu G2800 rotor. We also have 2 dipole antennas for 80 amd 160m.
  
The shack is very much under construction and the next steps would be to finish up the grounding and install 208V
+
The shack is continually under construction and the next steps would be to add remote control for antenna switching and rotor control. We also need to get 208V installed to run an amplifier.
  
 
Existing equipment:
 
Existing equipment:
  
1. Flex-5000 SDR Radio.
+
1. Flex-6400 SDR. This radio can be accessed remotely but the remote functionality is limited to select members while we sort out protocols and build out the remote control ability.
  
2. Kenwood TS-440S Radio
+
2. Kenwood TS-440S Radio.
  
 
3. Dell Computer with dual 1920 x 1080 displays.
 
3. Dell Computer with dual 1920 x 1080 displays.
Line 15: Line 15:
 
5. MFJ-1128 Power strip with Anderson Power pole connectors.
 
5. MFJ-1128 Power strip with Anderson Power pole connectors.
  
6. Daiwa Power Meter.
+
6. LP-100 Power Meter.
  
 
Planned equipment:
 
Planned equipment:
Line 23: Line 23:
 
2. IRLP Node on 2m or 220 Mhz.
 
2. IRLP Node on 2m or 220 Mhz.
  
3. 80/160m antenna.
+
3. 2M and 70cm antennas.
  
4. 2m, 220 & 440 Mhz antennas.
+
We also have a Yaesu FT-890, Ameritro ALS-600 and Dentron Antenna Tuner as backup equipment.
 +
 
 +
The shack is open to licensed Ham operators who has been certified to use the equipment. Contact Sebastian in the Ham Radio channel on Slack for certification. If you are interested in obtaining a Ham license, please contact the Larc Education Team: http://w0eno.org/Education

Revision as of 08:47, 11 June 2018

The main antenna is a Mosley Pro-67 mounted at 65 feet on a Rohn-25G tower. This antenna covers 40m (3el), 30m (1el), 20m (3el), 17m (2el), 15m(3el), 12m (2el) and 10m (4el). The antenna is turned with a Yaesu G2800 rotor. We also have 2 dipole antennas for 80 amd 160m.

The shack is continually under construction and the next steps would be to add remote control for antenna switching and rotor control. We also need to get 208V installed to run an amplifier.

Existing equipment:

1. Flex-6400 SDR. This radio can be accessed remotely but the remote functionality is limited to select members while we sort out protocols and build out the remote control ability.

2. Kenwood TS-440S Radio.

3. Dell Computer with dual 1920 x 1080 displays.

4. Astron 35A 13.8V Power supply.

5. MFJ-1128 Power strip with Anderson Power pole connectors.

6. LP-100 Power Meter.

Planned equipment:

1. Alpha 9500 Amplifier.

2. IRLP Node on 2m or 220 Mhz.

3. 2M and 70cm antennas.

We also have a Yaesu FT-890, Ameritro ALS-600 and Dentron Antenna Tuner as backup equipment.

The shack is open to licensed Ham operators who has been certified to use the equipment. Contact Sebastian in the Ham Radio channel on Slack for certification. If you are interested in obtaining a Ham license, please contact the Larc Education Team: http://w0eno.org/Education